ATTENTION!

• Installing this application is NOT mandatory. The pumping station is fully functional and can be configured using the touchscreen control panel supplied with every unit. The application can be installed for convenience, allowing remote monitoring and adjustment of basic parameters.
• At present, the Cloud Control application is available only in English and operates through the Chinese messaging platform WeChat. The manufacturer is currently developing mobile applications for the App Store (iOS) and Google Play Store (Android). These will also be available in the near future.

Cloud Control application installation procedure

Before installing the application, first register your device on a Wi-Fi network.

Note: Connection is possible only to a 2.4 GHz wireless network.

To connect to Wi-Fi, enter the network details in the device settings menu and press Submit.

Wait approximately 30 seconds. When the indicator lights up, it means that the Wi-Fi connection has been established successfully.

1. Download and install the WeChat messenger application. It is available from both the App Store and the Google Play Store.

You can find installation instructions for the messenger through a Google search. There are many videos and articles available online.

For new users outside China, it is often necessary for another active WeChat user to scan your QR code as part of the verification process.

After that, you will receive an SMS verification code on your phone number.

If you are unable to complete the verification process, you can contact our managers via +380956563757 (Viber). Send us your QR code through Viber, and we will assist with the verification.

2. In WeChat, navigate to the appropriate tab (see Figure 1) and tap the scan button.

Figure 1

3. Scan the QR code shown below (Figure 2).

Figure 2

The Cloud Control application will be loaded immediately.

For convenience, add it to your Favorites by tapping the three-dot menu (see Figure 3).

Figure 3

Next time, you can easily find the application in the “Favorites” section of WeChat (see Figure 4).

Figure 4

4. Add a new device by clicking the Add new equipment button (see Figure 5).

Figure 5

A scanner will appear on the screen. Use it to scan the QR code. This code can be found on the packaging of the pumping station or in the controller menu by pressing and holding the Fault record query button for 5 seconds (Figure 6).

Figure 6

After successful scanning, your device will appear in the Cloud Control application (Figure 7).

Figure 7

5. Enter your registration information, including your name and contact phone number. Save the data by pressing the Save button.

Figure 8

ATTENTION! Enter the contact phone number in the following format: 0038XXXXXXXXXX.

After entering the address, press Binding (see Figure 8) to complete the registration of your sewage pumping station.

Once registration is complete, you will gain access to the menu for monitoring operating parameters and adjusting basic settings of the pumping station (see Figure 9).

More advanced settings are available directly on the control panel. Descriptions and configuration instructions for all parameters can be found in the operating manual.

Figure 9