Catalog
Else categories
Cantilever pump for circulation BS4 100-315/150 (140/23.1), 15kW, 1450 without motor
Also buy with this product
Documentation
Download instructions, catalog for Cantilever pump for circulation BS4 100-315/150 (140/23.1), 15kW, 1450 without motor
Overview
The pumping part of the BS4 series cantilever pump is used in water supply systems, pressure boosting, pumping of various industrial liquids, circulation, watering, irrigation, in agriculture, air conditioning, centralized heating, fire extinguishing, etc. Pump analogues from other manufacturers: Calpeda NM, Pedrollo H/HF, Ebara 3D, Speroni CFM/mem/CS. The pump is used for work with non-aggressive liquids, which are not chemically aggressive in relation to the pump housing.
Characteristics
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 200 |
| Feed height, m | 28 |
| Power capacity, kW | 15 |
| Material | cast iron |
| Input pipe diameter | DN125 |
| Output pipe diameter | DN100 |
| Rate of turn, rpm | 1 450 |
| Protection | IP55 |
| Power supply | 3х380 V, 50 Hz |
| Explosion protection | No |
| Nom.pressure, Mpa | 1,6 |
| Max.flow rate, m3/h | 200 |
| Max.temperature, C | 120 |
| Impeller diameter, mm | 280 |
| Nom.flow rate, m3/h | 140 |
| Nom.head, m | 23.1 |
| Seal | Mechanical Seal, Carbon-SiC-NBR |
| Max. head, m | 28 |
| Impeller material | cast iron |
| Serial number of the pump | BS4 |
| Country of Origin | China |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Type of configuration | without engine |
| Warranty, months | 12 |
| Application | water, cooling tower, ice water, water recycling, heating, increasing pressure, glaze, the drying chamber, drying, circulation |
| Weight, kg | 157 |
| Height of transport volume, cbm | 0,261 |
Products from the same category
1045143
Pre-order only
1045144
Pre-order only
1045145
Pre-order only
1045147
Pre-order only
1045148
Pre-order only
1045149
Pre-order only