Catalog
- Home
- Industrial pumps
- Pumps by typeBarrel pumps Vacuum pumpsVertical semi-submersible pumpsScrew pumpsVortex pumpsHermetic pumpsDispersant-emulsifier, homogenizerDosing pumpsImpeller pumpsSewer stationsCantilever pumpsLobe pumpsDiaphragm pumpsMultistage pumpsCast iron monobloc pumpsMotor pumpsMotor diaphragm pumpsEx ATEX pumpPTO driven pumpDouble inlet pumpsInline pumpsGlandless pumpsAxial pumpsPeristaltic pumpsRotary vane pumpsPlunger pumpsSemi-submersible fecal, drainage pumpSubmersible drainage and fecal pumpsSubmersible slurry pumpsPiston pumpsRoller pumps Self-priming centrifgual pumpSanitary, hygienic pumpsBorehole pumpsSolenoid pump dispenserWater supply and fire extinguishing stationsChemical magnetic pumpsCentrifugal pumpsGear pumpsHose peristaltic pumps
- Dosing pumps
- Controllers and sensors
- Liquid analyzers
- Controller AQUA DIN 20 START CHLORINE (PT-CU)
Controller AQUA DIN 20 START CHLORINE (PT-CU)
Also buy with this product
Overview
A controller for measuring and regulating free chlorine is available for Pt-Cu amperometric probes.
Measurement range: 0.00-10.00 ppm.
Digital controller ADIN20S CL chlorine on a DIN rail.
- Backlit LCD display, 2 lines of 16 characters and 4 keyboard keys, for a simple user interface;
- 2 setpoints with independent adjustment and free relay outputs, selection in On-Off, proportional or temporary mode;
- Proportional output of 0/4-20 mA with the possibility of selecting the range;
- PT100 temperature sensors, level and flow sensor;
- The settings menu is password protected;
- Quick setup according to the user menu selection, manual control of both relays (priming of pumps), monitoring of the execution time of all outputs and monitoring the last calibration of the sensor;
- Really n. 2 is selected as a preset value or for each alarm signal.
- Statistics of alarms, the number of setpoint triggers and the operating time of each relay;
- Self-calibration of measuring probes.
Characteristics
Producer | AQUA |
Power supply | 1х220 V, 50 Hz |
Power capacity, Wt | 3 Вт |
Serial number of the controller | ADIN20 START |
Measuring parameters | Cl |
Measuring parameters | 0-10 ppm |
Measuring parameters | 1 |
Control | Microprocessing |
Logistics data: |