Order call 0
Industrial pumps
Mechanical seals
Internal devices of columns and apparatuses
Else
Catalog

PTO driven pump

PTO driven pump

MTZ-P 20/350 2"-2"

MTZ-P 20/350 2"-2" Pump parameter table MTZ-P 20/350 2"-2"

Tractor power with activated centrifugal pump has 2" inputs and 2" outputs and is used in rear tankers parts of tractors for filling and unloading water. Packed as shown in the picture. The tractor can be connected to the rod hanger of the portable ramp and used for agricultural irrigation. Ratios the gearboxes have been optimally introduced and fuel savings have been achieved. Tractor speed power take-off should be 300-350 rpm. At the same time, the tachometer of the tractor engine should show 600-700 rpm. This may vary according to the brand of the tractor. Any speeding may damage the transmission.

MTZ-P 30/300 3"-2½"

MTZ-P 30/300 3"-2½" Pump parameter table MTZ-P 30/300 3"-2½"

Tractor power with activated centrifugal pump has 3" inputs and 2.5" outputs and is used in tankers rear of tractors for filling and unloading water. Packed as shown in the picture. The tractor can be connected to the rod hanger of the portable trestle and used for agricultural irrigation. Ratios the gearboxes have been optimally introduced and fuel economy has been achieved. Tractor speed power take-off should be 300-350 rpm. At the same time, the tachometer of the tractor engine should show 600-700 rpm. This may vary according to the brand of the tractor. Any speeding may damage the transmission.

MTZ-P 40/600 2"-2"

MTZ-P 40/600 2"-2" Pump parameter table MTZ-P 40/600 2"-2"

Tractor power with activated centrifugal pump has 2" inputs and 2" outputs and is used in rear tankers parts of tractors for filling and unloading water. Can be used for agricultural irrigation. Packed as shown in the picture. The difference between this pump and ASb TKM-R 20 is that the gears are also used more. Thus, since the take-off power can operate at speeds from 540 rpm to 600 rpm, then it can be used as a Fire Pump. Especially the pressure values of such pumps are high, which function effectively in forest fires, and in a factory fire. Because of work at high speed, if desired, quiet operation can be ensured by grinding the profile intervals of the box gear. Special lubricant prevents overheating at high temperatures.

MTZ-P 50/350 3"-2½"

MTZ-P 50/350 3"-2½" Pump parameter table MTZ-P 50/350 3"-2½"

Tractor power with activated centrifugal pump has 3" inputs and 2.5" outputs and is used in rear tankers parts of tractors for filling and unloading water and for agricultural irrigation. Packed as shown in figure. The difference between this pump and ASb TKM-R 20 is that the gears are used even more. If you wish, you can ensure quiet operation by sanding the gearbox profile intervals.

MTZ-P 90/450 3"-3"

MTZ-P 90/450 3"-3" Pump parameter table MTZ-P 90/450 3"-3"

The tractor power with an activated centrifugal pump has 3" inputs and 3" outputs. The tractor can be connected to hanger rod portable racks, and used for agricultural irrigation. Packed like shown in the figure. It is a convenient and economical pump for agricultural irrigation, sprinkler and drip systems on lands of medium size. As a result of R&D research, the gear selection has been optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 90-2 /450 3"-3"

MTZ-P 90-2/450 3"-3" Pump parameter table MTZ-P 90-2/450 3"-3"

The tractor power with an activated centrifugal pump has 3" inputs and 3" outputs and has a pump with 2. The tractor can be connected to the rod hanger of the portable overpass, and used for agricultural irrigation. Packed as shown in the picture. Used to pump water up to more high altitudes and long distances during watering and drip irrigation. As a result of R&D research, the choice. The cogwheel has been optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 90-3 /450 3"-3"

MTZ-P 90-3/450 3"-3" Pump parameter table MTZ-P 90-3/450 3"-3"

The tractor power with an activated centrifugal pump has 3" inputs and 3" outputs and has a pump with 2. The tractor can be connected to the rod hanger of the portable overpass, and used for agricultural irrigation. Packed as shown in the picture. Used to pump water up to more high altitudes and long distances during watering and drip irrigation. As a result of research R&D choice. The cogwheel has been optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 100/500 4"-4"

MTZ-P 100/500 4"-4" Pump parameter table MTZ-P 100/500 4"-4"

The tractor power with an activated centrifugal pump has 4" inputs and 4" outputs and has a pump with 2. The tractor can be connected to the rod hanger of the portable overpass, and used for agricultural irrigation. Packed as shown in the picture. Used to pump water up to more high altitudes and long distances during watering and drip irrigation. As a result of research R&D choice. The cogwheel has been optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 125/450 5"-5"

MTZ-P 125/450 5"-5" Pump parameter table MTZ-P 125/450 5"-5"

The tractor power with an activated centrifugal pump has 5" inlet and 5" outlet and has a pump with 2 stages. Can be connected to the rod hanger of the portable trestle, and used for agricultural irrigation. Packed as shown in the picture. Used to pump water to higher heights and larger distances during irrigation and drip irrigation. As a result of R&D research, the gear selection was optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 150/420 6"-6"

MTZ-P 150/420 6"-6" Pump parameter table MTZ-P 150/420 6"-6"

The tractor power with an activated centrifugal pump has 6" inlets and 6" outlets and has a pump with 2 stages. Can be connected to the rod hanger of the portable flyover, and used for agricultural irrigation. Packed as shown in the picture. Used to pump water to higher heights and larger distances during irrigation and drip irrigation. As a result of R&D research, the gear selection was optimized, which allows operation on all brands of tractors of the brand.

MTZ-P 100-90S 4"-3"

MTZ-P 100-90S 4"-3" Pump parameter table MTZ-P 100-90S 4"-3"

A pump unit driven by the tractor PTO shaft, which takes water from the source and provides pressure
for feeding into the pipe system. The pump must be capable of flowing water at sufficient pressure for water to be applied from
rate and volume corresponding to the rate of penetration of water into the soil. Sprinkler irrigation is suitable for most
cereals, vegetables, fruits and berries, woody crops, etc. However, large irrigation ditches are not recommended for
irrigation of delicate crops such as lettuce, because the large water droplets created by the sprinklers can damage
harvest.

  • water can be sprayed both under a canopy and in greenhouses. 
  • water savings in relation to irrigation flooding;
  • adapts well to areas of complex configuration, terrain slopes;
  • suitable for all types of soil, except for heavy clay;
  • more even distribution of water in relation to irrigation flooding;
  • the possibility of applying soluble fertilizers;
  • limits soil disturbance, reduces risk soil erosion;
  • providing additional protection of plants from freezing at low temperatures;
  • simplicity and mobility of the design;
  • the possibility of dismantling at the end of irrigation;
  • phased input into operation due to limited funding for the construction of the system;
  • do not require high qualifications service personnel;
  • multipurpose use (fertilization, pumping of liquids);
  • the possibility of early watering;
  • reduction of capital costs (portable systems);
  • big choice water outlets and nozzles facilitates the selection of the water supply rate to the rate of water absorption by the earth;
  • favorable microclimate that promotes plant growth (the optimal level of air and soil moisture contributes to obtaining high yields);
  • high mobility when moving irrigation equipment from one field to other;
  • long service life.

ML 20 roller pump from tractor PTO for spraying

ML 20 Graph of pressure distribution and flow rate

The ML and MT series pumps are the most popular pumps for agricultural applications. Self-priming with rollers that are applied directly to the tractor PTO shaft without using a cardan shaft.
Thanks to practicality of use and maintenance, they are popular worldwide pumps for agricultural work such as high pressure washing, irrigation with or without sprinklers, and in the presence of soils with a large difference in height, movement and spraying.
Roller pumps are preferred the vast majority of farmers around the world. The rollers rotate inside the pump housing and push the solution out to spraying through the outlet to the nozzle. Roller pumps are inexpensive and exceptionally are universal. They operate efficiently at PTO speeds from 540 to 1000 rpm and have a wide pressure range up to 25 bar and flow rates from 8 to 300 l/min. Roller pumps are self-priming and easily mounted on a PTO shaft or connected to an internal combustion engine. Special materials, from which seals are made, rollers and castings can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
All models are equipped with a chain to attach to a fixed point on tractor. Model "MLI 25" is equipped with a brass pressure regulating valve. Special adapter available on request for use on cultivators.
Cast iron pump housing. Rotor with nylon rollers. Cast iron cover. Chain for fastening to a fixed point of the tractor.

ML 20 30/30 roller pump from tractor PTO for washing

ML 20 30/30 Graph of pressure distribution and flow rate 30/30

The ML and MT series pumps are the most popular pumps for agricultural applications. Self-priming with rollers, which are applied directly to the tractor PTO without using a cardan shaft.
Thanks to practicality of use and maintenance, they are popular worldwide pumps for agricultural work such as high pressure washing, irrigation with or without spray arms, and in the presence of soils with a large difference in height, movement and spraying.
Roller pumps are preferred the vast majority of farmers around the world. The rollers rotate inside the pump housing and push the solution out to spraying through the outlet to the nozzle. Roller pumps are inexpensive and exceptionally are universal. They operate efficiently at PTO speeds from 540 to 1000 rpm and have a wide pressure range up to 25 bar and flow rates from 8 to 300 l/min. Roller pumps are self-priming and easily mounted on a PTO shaft or connected to an internal combustion engine. Special materials, from which seals are made, rollers and castings can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
All models are equipped with a chain to attach to a fixed point on tractor. Model "MLI 25" is equipped with a brass pressure regulating valve. Special adapter available on request for use on cultivators.
Cast iron pump housing. Rotor with nylon rollers. Cast iron cover. Chain for fastening to a fixed point of the tractor.

MLI 25 roller pump from tractor PTO for irrigation

MLI 25 Wykres rozkładu ciśnienia i natężenia przepływu MLI 25

The ML and MT series pumps are the most popular pumps for agricultural applications. Self-priming with rollers that are applied directly to the tractor PTO shaft without using a cardan shaft.
Thanks to practicality of use and maintenance, they are popular worldwide pumps for agricultural work such as high pressure washing, irrigation with or without spray arms, and in the presence of soils with a large difference in height, movement and spraying.
Roller pumps are preferred the vast majority of farmers around the world. The rollers rotate inside the pump housing and push the solution out to spraying through the outlet to the nozzle. Roller pumps are inexpensive and exceptionally are universal. They operate efficiently at PTO speeds from 540 to 1000 rpm and have a wide pressure range up to 25 bar and flow rates from 8 to 300 l/min. Roller pumps are self-priming and easily mounted on a PTO shaft or connected to an internal combustion engine. Special materials, from which seals are made, rollers and castings can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
All models are equipped with a chain to attach to a fixed point on tractor. Model "MLI 25" is equipped with a brass pressure regulating valve. Special adapter available on request for use on cultivators.
Cast iron pump housing. Rotor with nylon rollers. Cast iron cover. Chain for fastening to a fixed point of the tractor.

MT 300 roller pump from tractor PTO for irrigation

MT 300 Wykres rozkładu ciśnienia i natężenia przepływu MT 300

The ML and MT series pumps are the most popular pumps for agricultural applications. Self-priming with rollers, which are applied directly to the tractor PTO without using a cardan shaft.
Thanks to practicality of use and maintenance, they are popular worldwide pumps for agricultural work such as high pressure washing, irrigation with or without spray arms, and in the presence of soils with a large difference in height, movement and spraying.
Roller pumps are preferred the vast majority of farmers around the world. The rollers rotate inside the pump housing and push the solution out to spraying through the outlet to the nozzle. Roller pumps are inexpensive and exceptionally are universal. They operate efficiently at PTO speeds from 540 to 1000 rpm and have a wide pressure range up to 25 bar and flow rates from 8 to 300 l/min. Roller pumps are self-priming and easily mounted on a PTO shaft or connected to an internal combustion engine. Special materials, from which seals are made, rollers and castings can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
All models are equipped with a chain to attach to a fixed point on tractor. Model "MLI 25" is equipped with a brass pressure regulating valve. Special adapter available on request for use on cultivators.
Cast iron pump housing. Rotor with nylon rollers. Cast iron cover. Chain for fastening to a fixed point of the tractor.

MT 600 roller pump from tractor PTO for irrigation

MT 600 Wykres rozkładu ciśnienia i natężenia przepływu MT 600

The ML and MT series pumps are the most popular pumps for agricultural applications. Self-priming with rollers, which are applied directly to the tractor PTO without using a cardan shaft.
Thanks to practicality of use and maintenance, they are popular worldwide pumps for agricultural work such as high pressure washing, irrigation with or without spray arms, and in the presence of soils with a large difference in height, movement and spraying.
Roller pumps are preferred the vast majority of farmers around the world. The rollers rotate inside the pump housing and push the solution out to spraying through the outlet to the nozzle. Roller pumps are inexpensive and exceptionally are universal. They operate efficiently at PTO speeds from 540 to 1000 rpm and have a wide pressure range up to 25 bar and flow rates from 8 to 300 l/min. Roller pumps are self-priming and easily mounted on a PTO shaft or connected to an internal combustion engine. Special materials, from which seals are made, rollers and castings can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
All models are equipped with a chain to attach to a fixed point on tractor. Model "MLI 25" is equipped with a brass pressure regulating valve. Special adapter available on request for use on cultivators.
Cast iron pump housing. Rotor with nylon rollers. Cast iron cover. Chain for fastening to a fixed point of the tractor.

Stock availability
Price, $
Producer1
Serial number of the pump
PumpType
Drive Type
Pump capacity, cu.m/hour
Feed height, m
Installation Type
Country of Origin
Material
Power capacity, kW
Application
Analogue for
Rate of turn, rpm
The capacity of the shaft, k.s.
The rotary speed of PTO, rpm
Else
Selection by parameters
Producer: FerroniClear
Catalog
Industrial pumps
Industrial pumps
Pumps by industry, purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Internal devices of columns and apparatuses
Internal devices of columns and apparatuses
Selection by parameters
Stock availability
Price, $
Producer
Serial number of the pump
Show all
PumpType
Drive Type
Pump capacity, cu.m/hour
Feed height, m
Installation Type
Country of Origin
Material
Power capacity, kW
Application
Show all
Analogue for
Show all
Rate of turn, rpm
The capacity of the shaft, k.s.
Show all
The rotary speed of PTO, rpm
Show all
Filter productsClear
Catalog
Industrial pumpsIndustrial pumps
Mechanical sealsMechanical seals
Else categories
0
Cart
$0
(empty)
Product in cart
Please select the language