Assembling a pump unit for thermal oil. The temperature of the thermal oil reaches 350°C

Aggregating and centering of the coupling. The unit is assembled on a steel welded frame, a resilient sleeve-and-finger coupling (MUVP type) is used to connect the shafts, which can compensate axial deviation up to 4 mm, parallel deviation up to 1.8 mm and angular deviation up to 1°.

The working unit is a pump of BTKF-K series, Turkish manufacturer ERDURO, which due to the special design of the mechanical seal chamber with cooling ribs, allows pumping oil coolant with temperature up to 350°C.

• Nominal capacity - 100 m.cube/hour.
• Operating pressure is 57 m.w.s. (5.7 atm).
• Engine power - 30 kW, 3000 rpm.