2022 — Prom-nasos.com.ua

SAER centrifugal single-stage cantilever monoblock pumps SAER IR series, this is Italian quality (production of SAER IR pumps is exclusively in Italy), combined with an acceptable price. Like other pumps of this type, they are used in many areas of industry and not only. Most often used: for water circulation in the system, heating, air conditioning, hot water supply, cold water supply to increase pressure in existing systems for pumping liquid from irrigation tanks in multi-pump automatic pressure boosting stations Advantages of SAER IR pumps: the pump part can be made of various materials cast iron, stainless steel and bronze. mechanical seals of various materials depending on the pumped medium italian quality

KSB HPKL 080-050-315 SGBS 0 P-No.50069413800010001, Q=108.26m3/h, H=134.7m, n=2950 1/min, 2018 year of production. Part number according to specification 411,412.,433.02 , namely: mechanical mechanical seal, a set of gaskets on the body. The pumped medium is a high—temperature organic coolant AMT-300 thermal oil containing chemical and mechanical substances that have a negative effect on materials (rubber O-rings). the temperature of the pumped medium is 160-200 degrees Celsius.

Membrane pumps are used for pumping solvent in the production of plant protection products (SPP) and the suspensions and emulsions of SPP themselves. The flow part of the pump (collector, valves, seats) is made of chemically resistant plastic (polypropylene, PVDF). The pump is driven by compressed air, which guarantees safety during transportation of solvents. The equipment is made in explosion-proof design according to ATEX class 2G c IIC Tx, II2D c Tx, I M2 c T (150 C)

Seal type U3-X6X62V6 d32 art. 16006890000 - for pumps N 32-125A/A, N 32-160A/A, N 32-200A/A, N 40-125A/A, N 40-160A/A, N 40-200A/A, N 40-250A/A, N 50-125A/A, N 50-160A/A, N 50-200A/A, N 50-250A/A, N 50M-E/A, N 50M-D/A, N 50M-C/A, N 65-125A/A, N 65-160A/A, N 65-200A/A, N 80-160A/A, AS 65-150C/A, AS 65-150B/A, AS 65-150A/A. Seal type U3-X6X62V6 D40 art. 16005350000 – for pumps N 65-250A, N4 65-315A, N 80-200A, N 80-250A, N4 80-315A, N 100-200A, N 100-250A, N4 100-315A, N4 125-250A. Seal type U2-X6GV6 d50 art. 16001650000 – for pumps Calpeda NM4 125/400, NM4 150/400, N4 80-400A, N4 100-400A, N4 125-315A, N4 125-400A, N4 150-315A, N4 150-400A. Decryption of sealing materials: 6 - NBR rubber (nitrile butadiene rubber), for oils and neutral media 7 - EPDM rubber (ethylene propylene rubber), for hot water and steam, alcohols, in contact with food and beverages Y - Viton rubber (fluoro rubber), for mineral oils and fats, acidic media. 5 - PTFE (Polytetrafluoroethylene, fluoroplast) exceptional chemical resistance. 4 - PTFE ((Polytetrafluoroethylene, fluoroplast) with filler- for chemically aggressive media. V – Carbon Graphite (Car) Z - Carbon graphite subjected to coking (Car) G - Stainless steel AISI 431 H - Stainless steel AISI 304 X - Stainless steel AISI 316 3 - Solid alloy of integral structure, corrosion-resistant, surfaced R - Tungsten Carbide TC 9 - Ceramics, steatite 2 - Ceramics, aluminum oxide 99.5% (Cer) E - Special spring steel for oil, temperatures over 100°C J - Stellite surfacing on 316 stainless steel L – Hastelloy (Hastelloy®) K – silicon carbide (Sic).

Collection of filtrate into storage tanks, pumping of industrial wastewater from wells or collection tanks, removal of condensate water, collection of liquids contaminated with petroleum products ATEX pumps can be installed in potentially explosive atmospheres in accordance with Directive 2014/34/EU and the restrictions established by the marking explained in the technical data sheet. Directive 2014/34/EC (ATEX) of equipment and protective systems intended for use in potentially explosive environments conformity assessment body regulation on the procedure for market surveillance product requirements safety explosion protection conformity assessment systems and market surveillance explosion-proof.