Order call0
Iindustrial pumps
Mechanical seals
Else
Catalog

Inline pumps

Inline pumps

Pumps with nozzles

In-Line pumps are used to deliver liquids with high pressure. It's better they are generally suitable for the supply of coolant and aggressive media. Unlike glandless pumps, these pumps, the liquid does not come into contact with the motor.

Another difference from glandless pumps is the way in which the pump housing /shaft is insulated. This is achieved with help mechanical seal

The design of the pump allows you to remove the pump head (motor, impeller) without completely dismantling the pump from pipeline. The pumps are installed "in line", they are compact, low noise, easy to install and service.

In-Line pumps /In-line pumps

Pumps with branch pipes "in line", represent a monoblock design with axes in-line suction and discharge nozzles and are designed to pump water in heating systems and water supply of residential and public buildings.

In-Line pumps, in which the suction and discharge nozzles are on the same axis and have the same conditional pass. In-line pumps are equipped with standard air-cooled flanged electric motors. Such the pump type is considered to be the most suitable for building systems requiring high power output. These pumps installed directly on the pipeline. In this case, the pipeline is fixed with brackets or a pump installed on a foundation or on a separate bracket.

If you still have questions, ask our specialists by phone, e-mail [email protected] or in chat (in the lower right corner of the screen). Pumps of construction inline with delivery across Ukraine.

Inline pumps "

JL Flanged Pumps
  • Consumption: from 4 to 105 m³ / hour.
  • Head: from 9 to 22 m.
Pumps with dry rotor made of IRG cast iron
  • Consumption: from 11 to 400 m³ / hour.
  • Head: from 12 to 80 m.
IHG stainless steel dry rotor pumps
  • Consumption: from 11 to 400 m³ / hour.
  • Head: from 12 to 80 m.
Special IPH pumps for heat transfer oil
  • Temperature: from -10 ° C to + 350 ° C

Inline make-up pumps "

CDLF Series Multistage Pumps
  • Consumption: from 1 to 22 m³ / hour.
  • Head: from 12 to 230 m.
MVI vertical high pressure pumps
  • Consumption: from 3 to 120 m³ / hour.
  • Head: from 130 to 240 m.
High pressure glandless pumps MVIS
  • Consumption: from 1 to 14 m³ / hour.
  • Head: from 20 to 110 m.
Price, $
Producer
Serial number of the pump
PumpType
Drive Type
Installation Type
Max.flow rate, m3/h
Max. head, meter of water column
Nom.flow rate, m3/h
Nom.head, meter of water column
Country of Origin
Material
Power capacity, kW
Power supply
Explosion hazard
Else
Selection by parameters
Load more
Catalog
Iindustrial pumps
Iindustrial pumps
Pumps by purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Selection by parameters
Price, $
Producer
Serial number of the pump
Show all
PumpType
Drive Type
Installation Type
Max.flow rate, m3/h
Max. head, meter of water column
Nom.flow rate, m3/h
Nom.head, meter of water column
Country of Origin
Material
Power capacity, kW
Show all
Power supply
Explosion hazard
Filter productsClear
Catalog
Iindustrial pumpsIindustrial pumps
Mechanical sealsMechanical seals
0
Cart
$0
(empty)
Product in cart