Order call0
Iindustrial pumps
Mechanical seals

Centrifugal pumps

Centrifugal pumps

Centrifugal pumps - these are pumps that carry out pumping using the movement of the worker wheels in the corresponding chamber from the center to the periphery, that is, using centrifugal forces.

Centrifugal pumps are used for pumping clean water and chemically non-aggressive liquids, pressure is generated in centrifugal pumps by rotating one or more impellers. Centrifugal the pumps are very simple and reliable in operation, there is no need for maintenance. Install centrifugal the pumps should be installed in places protected from the weather.

The most common typecentrifugal pumps are single-stage centrifugal pumps with horizontal shaft and single-entry impeller.

Centrifugal pumps are: console, horizontal, artesian, submersible, vertical, chemical, condensate, oil, marine, sand, soil, sludge, fecal, pumps for suspended substances, vortex, gasoline.

When choosing a pump it is necessary to take into account the spread of pump parameters in terms of flow and head, including when different turning of the impeller, as well as the ability to find the required operating mode within the working area of its characteristics. This selection allows you to make a pivot chart of the fieldsQ and H.

LLC "Riverst" is a supplier of pumping equipment such companies as: Wilo, SAER, Pedrollo, Ebara.


Wilo pumps

SAER pumps

Pedrollo pumps

Ebara pumps

Debem pumps


Centrifugal pumps "

Monoblock centrifugal pumps

Stainless Steel GTP Centrifugal Pumps

  • Consumption: from 1.2 to 12 m³ / hour.
  • Head: from 14 to 38 m.
Centrifugal pumps SM made of stainless steel AISI 304

  • Consumption: from 3 to 72 m³ / hour.
  • Head: up to 55 m.
Centrifugal surface pumps CDX, 2CDX

  • Consumption: up to 15 m³ / hour.
  • Head: up to 38 m.
DWO open impeller pumps

  • Consumption: up to 66 m³ / hour.
  • Head: up to 17 m.
Self-priming centrifugal pumps Wilo WJ

  • Consumption: 40 m,
  • Head: 3 m³ / h,
Horizontal high pressure pumps MHI

  • Consumption: up to 25 m³ / hour.
  • Head: up to 70 m.
IR SAER pumps for water supply and circulation

  • Consumption: up to 100 m.
  • Head: up to 275 m³ / hour.
JLM cast iron hot water pumps

  • Consumption: from 4 to 70 m³ / hour.
  • Head: from 9 to 20 m.
SAER FC centrifugal pumps with two impellers

  • Consumption: up to 96 m.
  • Head: up to 18 m³ / hour.

Centrifugal Chemical Pumps

Hermetic pumps with magnetic drive FMB

  • Consumption: from 15 to 70 l /min.
  • Head: Max. up to 8 m.
Chemical pump MV for pumping acids

  • Consumption: up to 55 m³ /hour.
  • Head: up to 34 m.
IM vertical chemical pumps

  • Consumption: up to 75 m³ /hour.
  • Head: up to 38 m.
Magnetic Drive Pumps DM

  • Consumption: up to 35 m³ /hour.
  • Head: up to 24 m.

In-line centrifugal pumps

JL Flanged Pumps

  • Consumption: from 4 to 105 m³ / hour.
  • Head: from 9 to 22 m.
Pumps with dry rotor made of IRG cast iron

  • Consumption: from 11 to 400 m³ / hour.
  • Head: from 12 to 80 m.
IHG stainless steel dry rotor pumps

  • Consumption: from 11 to 400 m³ / hour.
  • Head: from 12 to 80 m.
Special IPH pumps for heat transfer oil

  • Temperature: from -10 ° C to + 350 ° C

Centrifugal multistage pumps

CDLF Series Multistage Pumps

  • Consumption: from 1 to 22 m³ / hour.
  • Head: from 12 to 230 m.
MVI vertical high pressure pumps

  • Consumption: from 3 to 120 m³ / hour.
  • Head: from 130 to 240 m.
High pressure glandless pumps MVIS

  • Consumption: from 1 to 14 m³ / hour.
  • Head: from 20 to 110 m.

Cantilever centrifugal pumps

Centrifugal cantilever pumps CronoNorm NL Wilo


NL cantilever pumps are designed for use in municipal water supply and irrigation systems, equipment for buildings and structures, etc.

  • Consumption: up to 3000 m³ /hour.
  • Head: up to 145 m
  • Temperature: from -10 ° С to + 120 ° С.
Load more
Iindustrial pumps
Iindustrial pumps
Pumps by purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Iindustrial pumpsIindustrial pumps
Mechanical sealsMechanical seals
Product in cart