Order call 0
Industrial pumps
Mechanical seals
Internal devices of columns and apparatuses
Else
Catalog

Pumping stations

Pumping stations

Automatic pumping stations are installations designed to supply water and maintaining the required pressure in the system. They are ideal for increasing the pressure in the hydraulic system when pumping water from storage tanks or from the water supply network.

The pumping station includes a multistage self-priming pump capable of supplying water from a depth, as well as a pressure switch and a pressure tank. When the selection of such a unit, first of all, you need to pay attention to the volume of the accumulator: the larger its volume, the the less often the pump is turned on, the longer the station will last.

Pumping stations

Water supply at home, summer cottages

External installation

External installation.
Automatic water supply to the house from a well using a pumping station.

External installation

External installation.
Depth to water surface up to 8 m.

It is also worth paying due attention to the lifting depth. It is better to use it if the depth is up to water surface up to 8 m. In case the depth is deeper, you will have to install a submersible pump.

Device and principle of operation

The automatic pumping station (fig.) Consists of a surface centrifugal self-priming electric pump, hydroaccumulator, pressure switch, pressure gauge and connecting fittings. The electric pump consists of a pumping part and electric motor, which are mounted on the adapter flange.

  • The pumping part is a cast iron or stainless steel casing, an impeller made of brass and built-in ejector.
  • Electric motor - asynchronous, closed type with external ventilation. Installed on the electric motor terminal box containing the capacitor and terminal blocks for connecting the motor to the cable power supply.
  • The hydraulic accumulator is designed to store water under pressure. Consists of a reservoir with replaceable diaphragm made of food grade rubber and has a pneumatic valve for air injection.
  • The pressure switch serves to automatically turn on and off the pump depending on the water pressure in the system.
  • The pressure gauge is designed for visual control of the pressure in the system.

Installation and commissioning of pumping stations

Before installing the electric pump (automatic pumping station), it is necessary to choose the correct installation location. It is recommended to install the electric pump either indoors or outdoors on a horizontal platform, in well ventilated and protected from bad weather.

Pump installation diagram (pumping station)

Load more
Catalog
Industrial pumps
Industrial pumps
Pumps by industry, purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Internal devices of columns and apparatuses
Internal devices of columns and apparatuses
Catalog
Industrial pumpsIndustrial pumps
Mechanical sealsMechanical seals
Else categories
0
Cart
$0
(empty)
Product in cart
Please select the language