Catalog
Else categories
IR65-200NC-G-HP25 V400 / 690/50 -3P50HZ Monoblock Electric Pump
Also buy with this product
Overview
Scope of application:
IR-IR 4P series pumps are used in recirculation systems, heating,
cooling, air conditioning, high pressure groups, fire extinguishing
fire extinguishing systems.
Design characteristics:
IR-IR 4P series pumps are monoblock pumps with a single impeller, extended coupling,
are equipped with asynchronous motors.
Flanges (UNI EN 1092-2) from DN 150, PN 16 DN, from 200 PN 10. Standard mechanical seal.
seal, other versions on request.
Motor:
Asynchronous two-pole;
Version BP3/BP5;
Protection class: IP 55;
Insulation: Class F;
Standard supply voltage: 220-240 V up to 4 kW; 380-415/660-720 V from 5.5 kW;
Frequency: 50 Hz.
Specifications:
Suction connection DN: 50 to 100 mm. (150 for IR 4P)
DN of discharge connections: 32 to 80 mm. (125 for IR 4P).
Pumping capacity: up to 275 m3/h at 2900 rpm; up to 400 m3/h at 1450 rpm;
Pressure: up to 100 m at 2900 rpm; 43 m at 1450 rpm;
Temperature of pumped liquid: from - 15°C to + 120°C.
Characteristics
| Producer | SAER |
| Pump capacity, m3/h | 140 |
| Feed height, m | 44.3 |
| Power capacity, kW | 18,5 |
| Material | cast iron |
| Input pipe diameter | 80 |
| Output pipe diameter | 65 |
| Rate of turn, rpm | 2 900 |
| Protection | IP55 |
| Power supply | 3х380 V, 50 Hz |
| Explosion protection | No |
| Max.flow rate, m3/h | 140 |
| Max.temperature, C | 120 |
| Seal | Mechanical Seal |
| Max. head, m | 44.3 |
| Material of flow channel | cast iron |
| Serial number of the pump | IR |
| Country of Origin | Italy |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Type of configuration | with engine |
| Weight, kg | 245 |
Categories:Cantilever pumpsCast iron monobloc pumpsCentrifugal pumpsWater pumpsPumps for land reclamation and irrigationPumps for fish farmingWastewater pumpsPumps for water supplyHorizontal pumps IR (SAER) for water supply and ci
Products from the same category
