Order call0
Iindustrial pumps
Mechanical seals
Else
Catalog

Pool control station My Pool

My Pool

Automatic control and dosing station for private pools (complete with peristaltic pump). PH measurement, redox potential

AUTOMATIC DOSING AND CONTROL STATIONS FOR POOLS

MyPOOL S

  • Automatic dosing and level control station PH /RX for swimming pools up to 50 m³;
  • Built-in hysteresis;
  • Built-in protection (blocking) against changes in basic settings;
  • Dosing modes: constant ON /OFF and proportional PROP (frequency on /off pump slows down as it approaches the set point)
  • Pump capacity: 1.6 l /h - 1.5 bar;
  • Measurement ranges: 6.8 ÷ 7.4 for pH level, 300 ÷ 900 mV for level RedOx.
Model Productivity, l /h Back pressure, bar
CXB3000131ER MyPOOL S PER pH 1.6 1.5
CXB3000231ER MyPOOL S PER Rx 1.6 1.5

Model Name MyPool S PER pH MyPool S PER Rx
1ELT014 PH electrode with 5 m cable
ASZ0000301ER Calibration solution pH 9
1ELT015 Rx electrode with 5 m cable
ASZ0001501ER Calibration solution Rx 650 mV
DPS0002301 In-line electrode holder 1/2 "
2144032 Injection valve A05
AVA2000301ER Reagent intake valve
Reagent intake hose, 4x6, PVC, 2 m
Reagent discharge hose, 4x6, PE, 2 m
KSO0000201 Level sensor with 2 m cable

MyPOOL /B S

MyPOOL/B S PER
  • Automatic dosing and level control station PH /RX for swimming pools up to 150 m³;
  • The pump performance of the BV PER series is regulated by a potentiometer (changing the number of revolutions engine) in the range from 10-100%;
  • Dosing modes: constant ON /OFF and proportional PROP (pump on /off frequency slows down as it approaches the set point)
  • Pump capacity: 3 l /h - 3 bar;
  • Measurement ranges: 6.8 ÷ 7.4 for pH level, 300 ÷ 900 mV for level RedOx.
Model Productivity, l /h Back pressure, bar
CXB3004104ER MyPOOL /B pH PER 2.0 2.0
CXB3004106ER MyPOOL /B Rx PER 2.0 2.0
CXB3004105ER MyPOOL /B pH PER 3.0 3.0
CXB3004107ER MyPOOL /B Rx PER 3.0 3.0

Equipment of stations

Model Name MyPool /B PER pH MyPool /B PER Rx
1ELT014 PH electrode with 5 m cable
ASZ0000301ER Calibration solution pH 9
1ELT015 Rx electrode with 5 m cable
ASZ0001501ER Calibration solution Rx 650 mV
DPS0002301 In-line electrode holder 1/2 "
2144032 Injection valve A05
AVA2000301ER Reagent intake valve
Reagent intake hose, 4x6, PVC, 2 m
Reagent discharge hose, 4x6, PE, 2 m
KSO0000201 Level sensor with 2 m cable

Principle of operation:

Peristalsis Is a series of automatic abbreviations that advance the drug to be dispensed channel or hose. By mechanically simulating the biological effect of peristalsis, the rollers squeeze the walls of the hose, forming a plug that moves along the hose as the rollers move, while the previously covered section it straightens out and the liquid is taken into the formed vacuum.

The liquid will move along the hose until it is completely straightened out, at this moment, for to prevent the liquid from flowing back, the movement along the hose starts the second roller, which acts in a similar way way. In this case, rollers moving with the help of a special motor create both the force of the fence and the output pump pressure.

Technical specifications:

  • equipment complies with CE standards;
  • anti-acid plastic housing GW PLAST ©;
  • level sensor support;
  • standard power supply: 230V, 50 Hz, single-phase (drops not more than ± 10%);
  • on request (differences no more than ± 10%): 110 V, 50-60 Hz, single phase.

Materials of the flowing part of the pump:

  1. Hose: Santoprene®.
  2. Intake filter: Polypropylene.
  3. Intake hose: Cristal® PVC.
  4. Drain hose: Polyethylene.

Features of the MyPOOL series pumps:

MyPOOL is an easy-to-use device based on a peristaltic pump and an electronic analyzer capable of automatically dosing and monitoring the physicochemical parameters of swimming water swimming pool, such as pH and ORP (redox potential in mV). Two modes available dosing pump: ON-OFF or proportional.

A peristaltic pump, both in ON-OFF and proportional mode, doses when the measured value differs from set to more than 0.4 pH (for MyPOOL PH) or 30 mV (for MyPOOL RX) or even proportional mode, when the discrepancy is less depending on the set modes:

MyPOOL pH (factory setting):installation point=7.2 pH;dosage regimen= ON /OFF;dosing direction=acid

MyPOOL RX (factory setting):installation point=700 mVdosage regimen= ON /OFF dosing direction=oxidation

Catalog
Iindustrial pumps
Iindustrial pumps
Pumps by purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Catalog
Iindustrial pumpsIindustrial pumps
Mechanical sealsMechanical seals
0
Cart
$0
(empty)
Product in cart