- Home
- Industrial pumps
- Pumps by industry, purposeThe barrier pump of the refinery of pollutantsHigh temperature pumps +400°CCryogenic pumps for liquids -196°CEx pump for biogas plantsATEX gas intake well filtrate pumping pumpBiogas Intake and Utilization Filtrate PumpWater pumps of producing wellsPumps for unloading and loading railway tanksPumps for lowering the flood water levelBilge pump Ex ATEX certificatePumps for agriculture and irrigationPumps for the food industryHydroponics (Fertilizer Dosing Systems)Pumps for woodworkingChemical pumpsPumps for housing and communal servicesEvaporator pumpsSteam boiler pumps, feed pumpsIndustrial pumps
- Industrial pumpsVacuum pumps type HBR, HBR and AVZScrew pumps for polluted water type 1B, ANSScrew pumps type A1 3B (oil, fuel oil)Vortex pumps type VK and VKSHorizontal pumps type DMetering pumps type NDCondensate pumps type KsCantilever monoblock pumps type KMCantilever pumps type K and KSBOil gear type НМШ, Ш (bronze)Monoblock PumpsOil and gasoline pumpsSand pumps type PR, PK, PB, P, GrATPE feed pumpsFeed pumps TsVK, AN, PDV, PDG (steam)Food pumpsPneumatic PumpsHand pumps - type R and BKFWaste-mass pumps type 2SM with reduced energy consWaste mass type SMFecal pumps type SD, SDVChemical monoblock type XMCentrifugal vortex pumps type AN, PN, PDV and CVKSectional centrifugal pumps, type CNS, CNSg, CNSgmGear pumps type НМШ, ШHose and tube pumpsPump station SILVER 100 /24CPumping units TsNBKFood pumps ZCDZENNF food pumpsFrequency inverter Hyundai N700Rotary gear pumps NRP ShCirculation pumps GHN, GHNM three-speedScrew pumps NRP Shn
- Waste-mass pumps type 2SM with reduced energy cons
Waste-mass pumps type 2SM with reduced energy cons
Appointment
Pumps 2CM - with reduced energy consumption - are designed for pumping household, industrial wastewater and other contaminated liquids with a pH value from 6 to 8,5 with a content abrasive particles no more than 1% by volume, up to 5 mm in size, temperature from 0 to 85 degrees. Shaft seal pumps - single gland. The material of the flowing part is gray cast iron.
Design
Units of 2SM type are centrifugal, horizontal, single-stage with a closed impeller. The pump shaft is sealed with a single gland. The material of the flowing part is gray cast iron.
Pumps 2SM produced by Ukrnasosservice are interchangeable with similar pumps of the Rybnitsa pumping station factory.
Thanks to the improved impeller and higher efficiency of 2CM pumps produced Ukrnasosservice, units based on them are equipped with electric motors at a stage of lower power, it reduces initial purchase and energy costs over the entire period service of this equipment.
Pump 2SM80-50-200/2
- Delivery: 50 cbm/hour
- Head: 50 m.w.
- Power: 15 kW
- RPM: 3000
Pump 2SM80-50-200/2a
- Delivery: 45 cbm/hour
- Head: 42 m.w.
- Power: 11 kW
- RPM: 3000
Pump 2SM80-50-200/2b
- Delivery: 40 cbm/hour
- Head: 35 m.w.
- Power: 11 kW
- RPM: 3000
Pump 2SM80-50-200/4
- Delivery: 25 cbm/hour
- Head: 12,5 m.w.
- Power: 3 kW
- RPM: 1500
Pump 2SM80-50-200/4a
- Delivery: 22 cbm/hour
- Head: 10,5 m.w.
- Power: 2,2 kW
- RPM: 1500
Pump 2SM80-50-200/4b
- Delivery: 20 cbm/hour
- Head: 9 m.w.
- Power: 1,5 kW
- RPM: 1500
Pump 2SM100-65-200/2
- Delivery: 100 cbm/hour
- Head: 52 m.w.
- Power: 30 kW
- RPM: 3000
Pump 2SM100-65-200/2a
- Delivery: 86 cbm/hour
- Head: 42 m.w.
- Power: 22 kW
- RPM: 3000
Pump 2SM100-65-200/2b
- Delivery: 75 cbm/hour
- Head: 32 m.w.
- Power: 18,5 kW
- RPM: 3000
Pump 2SM100-65-200/4
- Delivery: 50 cbm/hour
- Head: 12,5 m.w.
- Power: 4 kW
- RPM: 1500
Pump 2SM100-65-200/4a
- Delivery: 43 cbm/hour
- Head: 10,5 m.w.
- Power: 3 kW
- RPM: 1500
Pump 2SM100-65-200/4b
- Delivery: 38 cbm/hour
- Head: 8 m.w.
- Power: 2,2 kW
- RPM: 1500
Pump 2SM150-125-315/4
- Delivery: 200 cbm/hour
- Head: 32 m.w.
- Power: 37 kW
- RPM: 3000
Pump 2SM150-125-315/4a
- Delivery: 175 cbm/hour
- Head: 26,5 m.w.
- Power: 30 kW
- RPM: 1500
Pump 2SM150-125-315 /4b
- Delivery: 145 cbm/hour
- Head: 20,5 m.w.
- Power: 22 kW
- RPM: 1500
Pump 2SM150-125-315/6
- Delivery: 136 cbm/hour
- Head: 14 m.w.
- Power: 11 kW
- RPM: 1000
Pump 2SM150-125-315/6a
- Delivery: 120 cbm/hour
- Head: 10.5 m.w.
- Power: 7.5 kW
- RPM: 1000
Pump 2SM150-125-315/6b
- Delivery: 100 cbm/hour
- Head: 8,5 m.w.
- Power: 7,5 kW
- RPM: 1000
Pump 2SM250-200-400/4
- Delivery: 800 cbm/hour
- Head: 50 m.w.
- Power: 160 kW
- RPM: 1500
Pump 2SM250-200-400/4a
- Delivery: 760 cbm/hour
- Head: 42,5 m.w.
- Power: 132 kW
- RPM: 1500
Pump 2SM250-200-400/4b
- Delivery: 720 cbm/hour
- Head: 35 m.w.
- Power: 132 kW
- RPM: 1500
Pump 2SM250-200-400/6
- Delivery: 530 cbm/hour
- Head: 22 m.w.
- Power: 55 kW
- RPM: 1000
Pump 2SM250-200-400/6a
- Delivery: 500 cbm/hour
- Head: 18 m.w.
- Power: 45 kW
- RPM: 1000
Pump 2SM250-200-400/6b
- Delivery: 470 cbm/hour
- Head: 15 m.w.
- Power: 37 kW
- RPM: 1000