- Home
- Industrial pumps
- Pumps by manufacturer
- DEBEM
- Drum pumps TR for barrels, containers
Drum pumps TR for barrels, containers
Specifications
- performance: up to 90 l/min;
- execution options: polypropylene (PP), polyvinylidene fluoride (PVDF), stainless steel AISI 316;
- work with corrosive liquids;
- immersion pipe length: 900 mm or 1200 mm;
- viscosity: up to 600 cP;
- portable, with the possibility of easy dismantling;
- interchangeability: electric motor or pneumatic motor;
- adjustable performance (models with a pneumatic motor);
- lack of internal seals.
Similar Products
Pumping various liquids from various containers, barrels, tanks
Pump description
Drum Chemical Pumps DEBEM companies are designed for pumping both neutral and highly corrosive liquids from barrels, containers, baths and other containers.
Drum pumps make it possible to facilitate the process of emptying drums and other containers as much as possible or to carry out pumping liquid from one container to another.
Various designs of the flow path, ranging from chemically resistant plastics to highly alloyed stainless steel, provide the ability to pump almost any medium, including highly concentrated acid solutions and mixtures thereof.
High-speed single-phase and three-phase electric motors are used as a pump drive, as well as pneumatic motors.
For hazardous areas, explosion-proof stainless steel pumps with electric and pneumatic motors.
Performance
Electric drum pumps
TR P-EL, TR F-EL, TR A-ELPneumatic drum pumps
TR P-PN, TR F-PN, TR A-PNModel | TR P - PN | TR F - PN | TR A - PN | TR P - EL | TR F - EL | TR A - EL |
Pipe material | PP | PVDF | AISI 316 | PP | PVDF | AISI 316 |
Ø pipe, mm | 42 | 40 | 42.5 | 42 | 40 | 42.5 |
Pipe length, mm | 900/1200 | |||||
Axle material | Hastelloy | Hastelloy | AISI 316 | Hastelloy | Hastelloy | AISI 316 |
Bushing material | PTFE | |||||
Impeller material | ECTFE | |||||
Suction tube | PP | ECTFE | ECTFE | PP | ECTFE | ECTFE |
Add. parts | PP + PTFE | PVDF + PTFE | PTFE + PPS-V | PP + PTFE | PVDF + PTFE | PTFE + PPS-V |
Ø hose, mm | 25 | |||||
Temperature | 50 | 85 | 85 | 50 | 85 | 85 |
Engine's type | pneumatic | electric | ||||
Engine power | 0.5 HP A 7 bar | 500/800 W | ||||
Spins | 230 V | |||||
Motor protection | IP 54 |
Barrel pump device
Barrel pumping pumps consist of a submersible pipe, at the end of which there is an impeller, attached to the drive shaft connected to the pump with a convenient clamping ring, while how the transmission is carried out using a cardan clutch.
Mindset:
- cardan clutch;
- motor alignment ring;
- bearing;
- discharge channel;
- dip tube;
- PTFE bushing;
- impeller;
- fence hole;
- shaft.
Installing a barrel pump
Here is the barrel-type pump of the TR series when the installation must be located exclusively in upright position; the pump must be immersed in a container, working exclusively in the presence of liquids; dry running or air bubbles can damage the inner sleeve.
IMPORTANT! Running the drum pump dry or air bubbles can damage the inner sleeve!
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PVDF |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 12 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 12 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PVDF |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | PVDF |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | PVDF |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 7 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 4.8 |
Feed height, m | 12 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | AISI 316L |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PP |
Serial number of the pump | TR |
Producer | DEBEM |
Pump capacity, cu.m/hour | 5.4 |
Feed height, m | 15 |
Material | PVDF |
Serial number of the pump | TR |