Order call0
Iindustrial pumps
Mechanical seals
Else
Catalog

BOXER Diaphragm Pumps

BOXER

Specifications:

  • execution options: PP, PVDF /ECTFE, ALU and stainless steel AISI 316;
  • Possibility of operation in explosive environments (ATEX certification, zones 1-2);
  • the ability to use in harsh operating conditions and high humidity;
  • the ability to work in dry mode;
  • dry self-priming mode;
  • as a drive - the energy of compressed air without any presence of lubricant particles;
  • adjustable performance and operating suction head;
  • precise speed adjustment at constant pressure;
  • the possibility of double piping (two suction and pressure pipelines);
  • three suction and three exhaust manifolds;
  • diaphragm pumps for thick, viscous products

Materials

Мембранные насосы серии BOXER  Полипропилен

PP

(Polypropylene)

Мембранные насосы серии BOXER  Тефлон

ECTFE

(Teflon)

Мембранные насосы серии BOXER  Алюминий

Alu

(Aluminum)

Мембранные насосы серии BOXER Нержавеющая сталь

AISI 316

(Stainless steel)


Diaphragm pumps are powered by compressed air.

The advantages of diaphragm pumps:

  • Simple design - no motor and gearbox, no rotating parts
  • As a drive - the energy of compressed air,no sparking, absolute safety when working with flammable liquids
  • Compact size and light weight
  • The versatility of pumps - pumping water, viscous liquids, liquids with solids inclusions up to 12-15 mm in diameter
  • The pumps are free of seals and bearings - guaranteeing no leaks or wear on key parts
  • Ease of performance regulation
  • The pump does not require lubrication of the mechanisms

Diaphragm pump device

схема Мембранныого насоса серии BOXER

Diaphragm pumps consist of a centrally located coaxial pneumatic device with new generation diaphragms connected to the shaft. Ball valves are located on both sides of the pump housing. valves and corresponding seats on the suction and discharge ports.

A=ball valves

B=pumping chamber

C=membranes

D=inlet

E=outlet connection

F=air motor

The principle of operation of the diaphragm pump

The compressed air from the coaxial heat exchanger (A), which enters through one of the two membranes, compresses and pushes the pumped product through the outlet (B). Absorption of liquid occurs in as a result of the reduced pressure created by the membrane located opposite (C) and the component with the shaft of the coaxial device is a single whole. After each vibration, the pneumatic coaxial the heat exchanger directs the compressed air to the opposite diaphragm and then the cycle repeats.

Принцип работы мембранного насоса

Technical data

Pump model MicroBoxer MiniBoxer Boxer 50 Boxer 80 Boxer 81
MICROBOXER
MINIBOXER

BOXER 50

BOXER 80
BOXER 81
Intake /discharge holes G 1/2 " G 1/2 " G 1/2 " G 1 " G 1 "
Air inlet G 1/4 " G 1/2 " G 1/2 " G 1/2 " G 1/2 "
Max. fence height in dry condition, m five five five five 6
Max. performance, l /min thirty fifty fifty 90 one hundred
Max. head, m 70 70 70 70 70
Max. valid input air pressure, bar 7 7 7 7 7
Max. diameter of solid particles, mm 2 3 four four four
Net weight PP, kg 1.6 3.6 - - 5.0
Net weight PVDF (* ECTFE), kg 1.9 4.2 - - 6.5
Net weight Alu, kg - - 4.0 - 6.5
Net weight AISI 316, kg - 6.5 - 10.5 -
Materials (edit) pump versions PP, PVDF
Alu, AISI 316
PP, ECTFE
AISI 316
Alu AISI 316 PP

hr

Pump model Boxer 100 Boxer 150 Boxer 251 Boxer 502 Boxer 503
BOXER 100
BOXER 150
BOXER 251
BOXER 502
BOXER 503
Intake /discharge holes G 1 " G 1 1/4 " G 1 1/2 " G 2 " G 3 "
Air inlet G 1/2 " G 1/2 " G 1/2 " G 1/2 " G 1/2 "
Max. fence height in dry condition, m five five 6 four five
Max. productivity, l /min 150 220 340 650 850
Max. head, m 70 70 70 70 70
Max. admissible inlet air pressure, bar 7 7 7 7 7
Max. diameter of solid particles, mm four five 6 8 ten
Net weight PP, kg 7.5 12 - 54 56
Net weight PVDF, kg 8.5 14 - 65 67
Net weight Alu, kg 8.2 16 21 - -
Net weight AISI 316, kg eleven 21 32 49 -
Pump execution materials PP
PVDF
PP, PVDF
Alu, AISI
Alu,
AISI 316
Alu AISI 316

Basic installation types for Boxer diaphragm pumps:

Diaphragm pumps must be bolted horizontally to the floor or to the holes provided for the shaft a heat exchanger located horizontally.

  • reagent self-priming mode (max.viscosity 10000 cP at 20 ° C);
  • work as a barrel pump (max. viscosity 10,000 cP at 20 ° C);
  • positive suction lift of the reagent (max. viscosity 50,000 cP at 20 ° C);
  • full immersion in the pumped medium (max. viscosity 50,000 cP at 20 ° C) on request;
  • double version of suction and discharge manifold (max. viscosity 50,000 cP at 20 ° C);
  • double intake manifold (max. viscosity 50,000 cP at 20 ° C).

Self-priming operation

Работа в режиме самозакачивания

Working as a barrel pump

Работа в качестве бочкового насоса

Positive suction lift

Положительная высота всасывания

Full immersion in the pumped medium

Полное погружение в перекачиваемую среду

Double intake and exhaust manifold

Двойной всасывающий и выпускной коллектор

Double suction manifold

Двойной всасывающий и выпускной коллектор
Load more
Catalog
Iindustrial pumps
Iindustrial pumps
Pumps by purpose
Pumps by manufacturer
Mechanical seals
Mechanical seals
Catalog
Iindustrial pumpsIindustrial pumps
Mechanical sealsMechanical seals
0
Cart
$0
(empty)
Product in cart