Catalog
Else categories
Ebara 2CDXM 70/12, 220V pump
Also buy with this product
Overview
Ebara centrifugal pumps with two impellers with hydraulic components, which are made of Aisi 304 stainless steel (custom AISI 316).
Application: water treatment; filtration; industrial sinks; pressure boosting; industrial equipment; heating and air conditioning; cooling and refrigeration systems; irrigation; pumping moderately aggressive liquids.
Technical data: capacity up to 14.4 m3/h; feed height up to 75 M; T.E.F.C. 2-pole motor; insulation Class F; protection class IP 55; single-phase 220v, 50 Hz, three-phase 380V, 50 Hz; built-in capacitor and automatic thermal overload protection for the single-phase version. For the three-phase version, thermal overload protection must be provided by the consumer. Inlet pipe 1" 1/2 for 2cdx200, 1 " 1/4 for other models. Outlet pipe 1"
Characteristics
| Producer | Ebara |
| Pump capacity, cu.m/hour | 4.8 |
| Feed height, m | 44.5 |
| Power capacity, kW | 0,9 |
| Material | AISI 304 stainless steel |
| Input pipe diameter | G1 1/4 |
| Output pipe diameter | G1 |
| Rate of turn, rpm | 2 800 |
| Protection | IP55 |
| Power supply | 1х220 V, 50 Hz |
| Explosion protection | No |
| Max.flow rate, m3/h | 4.8 |
| Max.temperature, C | 60 |
| Motor capacitor capacity, µF | 31,5 |
| Seal | Mechanical Seal, Carbon/Ceramic/NBR |
| Max. head, m | 44.5 |
| Housing material | AISI 304 stainless steel |
| Impeller material | AISI 304 stainless steel |
| Shaft material | AISI 304 stainless steel |
| Serial number of the pump | 2CDXM |
| Country of Origin | Italy |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Weight, kg | 13,3 |
Categories:Cantilever pumpsCentrifugal surface pumps CDX, 2CDX
Products from the same category
