Catalog
Else categories
Thermal oil transfer pump EMSE EKY 32-125, 1.1 kW, 2900, without motor
Also buy with this product
Documentation
Download instructions, catalog for Thermal oil transfer pump EMSE EKY 32-125, 1.1 kW, 2900, without motor
Overview
EMSE pumps of the EKY series are heat exchange pumps, which are often used in the processes of pumping high temperature liquids, hot oil 320°C, hot water, for heating bitumen, for woodworking plants. This is a centrifugal pump with one impeller, a casing with fins for cooling, and an electric motor connected to the casing by an elastic coupling. This offers advantages during dismantling. The pump is fitted with a mechanical seal made of materials resistant to high temperatures. The bearing system is designed to withstand the pumping of hot liquids. The parts are made of ductile iron and the bearings are made of steel as standard. The pump can be easily disassembled if the impeller, bearings or seals need to be replaced.
Characteristics
| Producer | EMSE |
| Power capacity, kW | 1,1 |
| Material | cast iron |
| Input pipe diameter | DN50 |
| Output pipe diameter | DN32 |
| Rate of turn, rpm | 2 900 |
| Explosion protection | No |
| Max.flow rate, m3/h | 18 |
| Max.temperature, C | 320 |
| Impeller diameter, mm | 120 |
| Max. head, m | 17.6 |
| Serial number of the pump | EKY |
| Country of Origin | Turkey |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Warranty, months | 12 |
| Application | superheated water, thermal oil |
| Analogue for | FLOWSERVE, ERDURO BTKF-K, ALLWEILER, KSB, Pompetravaini TCD, SIHI, WILO |
| Weight, kg | 30 |
Categories:Cantilever pumpsCentrifugal pumpsThermal oil pumps +350High temperature pumps +400°C
Products from the same category
