Catalog
Else categories
Centrifugal pump CPm 130-ST6
Also buy with this product
Overview
Pumps in this series are designed for use in public sector and in agriculture. High efficiency is also possible to use a mode of long and high loads can successfully apply these pumps canal irrigation and irrigation for water withdrawal from lakes, rivers, wells, also in various fields of industry, when necessary to achieve high rates of supply in the medium and low pressure value.
Set the pump to take place indoors or in places that are protected from weathering and moisture.
Characteristics
| Producer | Pedrollo |
| Pump capacity, cu.m/hour | 6 |
| Feed height, m | 21.5 |
| Power capacity, kW | 0,25 |
| Input pipe diameter | 1" |
| Output pipe diameter | 1" 1/4 |
| Power supply | 1х220 V, 50 Hz |
| Explosion protection | No |
| Max.flow rate, m3/h | 6 |
| Max. head, m | 21.5 |
| Housing material | AISI 316L |
| Material of flow channel | AISI 316L |
| Serial number of the pump | CP |
| Country of Origin | Italy |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Application | water, cooling tower, ice water, water recycling, heating, increasing pressure, glaze, the drying chamber, drying, circulation |
Categories:Cantilever pumpsCentrifugal pumps
Products from the same category
