Catalog
Else categories
Speroni CS 40-250 B centrifugal monoblock pump
Also buy with this product
Overview
Centrifugal single-stage electric pump Speroni CS series manufactured according to DIN 24255 - NFE44-II - UNI 7467 standards. The pump and motor are connected via an intermediate flange. This pump is ideal for pumping clean water, water in heating systems and industrial and economic water, condensate and other liquid-flowing, mineral oil-free working media without abrasive or long-fiber inclusions and substances. If it is intended to pump a liquid whose density and/or viscosity differs from the same water parameters, then due to a change in hydraulic power, it is necessary to take into account the power required in this case by the electric motor. The pump with normal suction and spiral monoblock housing is used in industrial water cooling and circulation systems, heating and air conditioning systems, water supply and water treatment, technological processes.
Characteristics
| Producer | Speroni |
| Pump capacity, cu.m/hour | 54 |
| Feed height, m | 74 |
| Power capacity, kW | 11 |
| Input pipe diameter | DN65 |
| Output pipe diameter | DN40 |
| Power supply | 3х380 V, 50 Hz |
| Explosion protection | No |
| Nom.pressure, Mpa | 1 |
| Max.flow rate, m3/h | 54 |
| Max.temperature, C | 100 |
| Max. head, m | 74 |
| Material of flow channel | cast iron |
| Serial number of the pump | CS |
| Country of Origin | Italy |
| PumpType | console |
| Drive Type | electric |
| Installation Type | horizontal |
| Type of configuration | with engine |
| Application | antifreeze, drilling mixtures, water supply, glycerol, detergents, non-corrosive liquids, increasing pressure, solvents, heating systems, coolant, process fluids, brake fluids, antifreeze |
Categories:Cantilever pumpsCentrifugal pumpsMonoblock surface pumps Speroni CS
Products from the same category
