Catalog
Else categories
Pneumatic Membrane Pump PHOENIX P1000 AISI316 ATEX
Also buy with this product
Documentation
Download instructions, catalog for Pneumatic Membrane Pump PHOENIX P1000 AISI316 ATEX
Overview
The batch line of pneumatic membrane pumps PHOENIX of Italian brand FLUIMAC is presented by the broad range of models for solution of any degree of complexity industrial tasks. Membrane pumps PHOENIX with innovative air separation system, geometry of pump chambers and valve system, allows to pump over a wide range of aggressive products (concentrated acids, alkalis, solvents, laquers, glues, liquids with suspended particles to 10 mm, abrasive products, etc.) with viscosity from 6000 to 55000 cPs. Wet part of membrane pumps PHOENIX is made of such material as PVDF, Alu, POMc, PP, AISI316. The main working bodies (membranes, ball valves, ball seats) are made of PVDF, Alu, POMc, PP, AISI316, PTFE, NBR, PE, SANTOPRENE, HYTREL.
The advantages of pneumatic membrane pumps FLUIMAC:
- Dry self-suction to 6 m;
- Self-suction with flooded suction to 9,8 m;
- Unrestrained dry running.
Characteristics
| Producer | FLUIMAC |
| Pump capacity, cu.m/hour | 63 |
| Feed height, m | 80 |
| Material | AISI 316 stainless steel |
| Input pipe diameter | 3" |
| Output pipe diameter | 3" |
| Noise level ,dB | 78 |
| Explosion protection | Yes |
| Diametr of the product line | 3" |
| Max.flow rate, m3/h | 63 |
| Model | PHOENIX ATEX 1000 |
| Diameter of the pneumatic mainline | 3/4" |
| Max.temperature, C | 95 |
| Dry suction height, m | 5 |
| Suction capacity (NPSH), m | 9,8 |
| Max.viscosity, cPs | 55 000 |
| Max.air pressure, bar | 8 |
| Max.diameter of solid inclusions, mm | 10 |
| Flow rate, l/min | 1050 |
| Max. head, m | 80 |
| Material of flow channel | AISI 316 stainless steel |
| Diaphragm material at air side | SANTOPRENE+PTFE |
| Diaphragm material at water side | PTFE |
| Material of ball valves | PTFE |
| Material of valve seat | AISI stainless steel |
| Serial number of the pump | PHOENIX ATEX |
| Country of Origin | Italy |
| PumpType | membrane pneumatic |
| Drive Type | pneumatic |
| Availability of spare parts | Yes |
| Warranty, months | 12 |
| Application | nitric acid, ammonia, butane, hydrogen, viscous liquids, clays, ash, kaolin suspension, urea, carbonate, paints, varnish, saturated amine, oleum, peroxide, sulfur, reverse osmosis systems, alcohol, acetic acid, phenol, formalin, phosphates, phosphoric acid, slag, slip, alkalis, ethylene, ethers |
| Analogue for | AGRAL DDE-030, AGRAL DDE-100, AGRAL DDE-160, AGRAL DDE-300, AGRAL DDE-60, AGRAL DDE-600, AlphaDynamic Ruby, AQUA, AquaViva, Astralpool, Debem BOXER, Debem FOODBOXER, Debem SANIBOXER, DELLMECO DM, DELLMECO DMCX, DEPA DB, DEPA L, DEPA М, DEPA РМ (Р), DOSITEC, Duotek AF Zone 2 Atex, DUOTEK FOOD, DUOTEK SANI, Emec, FWT, Graco Husky, Grundfos, Injecta, Jesco Pump, MILTON ROY, Milwaukee, PRODOSE, ProMinent, Seko, Sera, WILDEN, YAMADA NDP |
| Weight, kg | 120 |
Categories:Diaphragm pumpsNitric acid pumpPump for liquid glassPump for potassium bichromate, caustic sodaPump for cream and pastePumps for viscous liquidsPumps for hexaneGlycerin pumpsAcid pumpsGlue pumpsPumps for paints and varnishesResin pumpsPumps for pumping alcohol ЕХPumps for freonLye pumpsAcid-resistant pumps for aggressive liquidsPumps for aggressive liquids, acid pumpPneumatic PumpsPhoenix diaphragm pumps
Products from the same category
