Catalog
Else categories
Pump for very hot liquids WILO IPH-W 20/160-0,37/4
Also buy with this product
Documentation
Download instructions, catalog for Pump for very hot liquids WILO IPH-W 20/160-0,37/4
Overview
Single-stage centrifugal pump WILO IPH with dry rotor in-line type for operation with very hot liquids. Three-phase electric motor with one-piece shaft and special lantern for housing with cooling fins for mechanical seal. This series is designed for installation in pipes with a horizontal shaft of the pump motor. IPH-O for temperatures up to 350 degrees IPH-W for temperatures up to 210 degrees
Characteristics
| Producer | Wilo |
| Pump capacity, cu.m/hour | 1.9 |
| Feed height, m | 8.5 |
| Power capacity, kW | 0,37 |
| Input pipe diameter | DN20 |
| Output pipe diameter | DN20 |
| Power supply | 3х380 V, 50 Hz |
| Nom.pressure, Mpa | 2,3 |
| Max.flow rate, m3/h | 1.9 |
| Max.temperature, C | 210 |
| Max. head, m | 8.5 |
| Material of flow channel | cast iron |
| Serial number of the pump | IPH-W |
| Country of Origin | Germany |
| PumpType | in-line |
| Drive Type | electric |
| Installation Type | horizontal |
| Type of configuration | with engine |
| Application | superheated water, thermal oil |
Categories:Inline pumpsCentrifugal pumpsSuperheated water pumpsThermal oil pumps +350Wood drying (circulation pumps)Special IPH pumps for superheated water and thermal oil
Products from the same category
