Catalog
Else categories
- Home
- Industrial pumps
- Pumps by typeBarrel pumps Vacuum pumpsVertical semi-submersible pumpsScrew pumpsVortex pumpsHermetic pumpsDispersant-emulsifier, homogenizerDosing pumpsImpeller pumpsSewer stationsCantilever pumpsLobe pumpsDiaphragm pumpsPneumatic diaphragm submersible pumpsMultistage pumpsCast iron monobloc pumpsMotor pumpsMotor diaphragm pumpsEx ATEX pumpPTO driven pumpDouble inlet pumpsInline pumpsGlandless pumpsAxial pumpsPeristaltic pumpsRotary vane pumpsPlunger pumpsSemi-submersible fecal, drainage pumpSubmersible drainage and fecal pumpsSubmersible slurry pumpsPiston pumpsRoller pumps Self-priming centrifgual pumpSanitary, hygienic pumpsBorehole pumpsSolenoid pump dispenserWater supply and fire extinguishing stationsChemical magnetic pumpsCentrifugal pumpsGear pumpsIndustrial hose peristaltic pumps
- Peristaltic pumps
- Peristaltic pump F-T 0101 24Vdc SANTOPRENE
Peristaltic pump F-T 0101 24Vdc SANTOPRENE
Also buy with this product
1042539
Pre-order only
Documentation
Download instructions, catalog for Peristaltic pump F-T 0101 24Vdc SANTOPRENE
Overview

The F-T peristaltic hose pump is a hose pump for the delivery of liquid reagents in non-pressure dosing systems. The pump is not intended for continuous operation. Pumps without casing, easy to mount in cabinets or drawers. Permanent "ON-OFF" dosing mode is activated by turning the potentiometer knob to the right to the maximum. The pump performance is controlled by a timer in the range of 0÷7 seconds. Use the adjustment knob to set the desired percentage of timed operation.
Materials of the pump:
- flow hose made of Santopren is elastic and resistant to liquid chemicals;
- hose size 4x7 mm (ID/OD - inner diameter 4 mm / outer diameter 7 mm), hose length 11 cm;
- 4 rollers ensure a smooth flow of the reagent;
- protection of the working rollers and hose is provided by a transparent polycarbonate cover;
- The hydraulic unit is housed in a polypropylene housing.
Characteristics
| Producer | ETATRON D.S. |
| Material | SANTOPRENE |
| Rate of turn, rpm | 20 |
| Power supply | 24V |
| Control | Manual |
| Dosage mode: Continually ON-OFF | Yes |
| Input foe sensor | No |
| Dosage mode: proportional PROP | No |
| Input for sensor CD | No |
| Product regulation 0-100% | Yes |
| Input foe temperature sensor | No |
| Input for level sensor reagent | No |
| Input mA | No |
| Flow rate, l/h | 1.1 |
| Input 4-20 mA | No |
| Output service relay | No |
| Pulse input(From Flowmetwer) | No |
| Support for flow sensor | No |
| Hose standard size | 4x7 |
| Input foe sensor PH | No |
| Mode of operation | Momentary mode |
| Pressure, bar | 1 |
| Input for sensor RX | No |
| Serial number of the pump | F-T |
| Country of Origin | Italy |
| PumpType | dosing peristaltic |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | antisepsis, liquid powders, acid, coagulant, misalignment, chemistry, alkalis |
| Analogue for | AquaViva, ASeko, Descon trol S, Emec, FWT, Injecta, Seko |
| Logistics data: |

























































































































































