Catalog
Else categories
- Home
- Industrial pumps
- Pumps by typeBarrel pumps Vacuum pumpsVertical semi-submersible pumpsScrew pumpsVortex pumpsHermetic pumpsDispersant-emulsifier, homogenizerDosing pumpsImpeller pumpsSewer stationsCantilever pumpsLobe pumpsDiaphragm pumpsMultistage pumpsCast iron monobloc pumpsMotor pumpsMotor diaphragm pumpsEx ATEX pumpPTO driven pumpDouble inlet pumpsInline pumpsGlandless pumpsAxial pumpsPeristaltic pumpsRotary vane pumpsPlunger pumpsSemi-submersible fecal, drainage pumpSubmersible drainage and fecal pumpsSubmersible slurry pumpsPiston pumpsRoller pumps Self-priming centrifgual pumpSanitary, hygienic pumpsBorehole pumpsSolenoid pump dispenserWater supply and fire extinguishing stationsChemical magnetic pumpsCentrifugal pumpsGear pumpsIndustrial hose peristaltic pumps
- Solenoid pump dispenser
- Dosing pump PDE HC101-2 07-04/08-02/10-00 230V PP-GL-VT
Dosing pump PDE HC101-2 07-04/08-02/10-00 230V PP-GL-VT
Also buy with this product
Overview

Analog dosing pump HC101 CST for constant dosing with an adjustable piston stroke rate (0 ... 100% or 0 ... 20%).
Solenoid dosing pumps for constant and proportional dosing with adjustable piston stroke rate and volume using special buttons. Easy to adjust with two potentiometers and LED indicator. Supports level sensor. Available in three models: HC101 constant, HC101 PI (proportional dosing controlled by a pulse counter signal) and HC101 mA (proportional dosing controlled by a current 4-20mA signal).
- Case: PP;
- Level sensor input;
- Analog pulse frequency control of 0-100% or 0-20%.
- Power supply: 220V AC - 50 / 60Hz.
- On-Off Switch;
- Protection class-IP65;
- Analogue of the adjustment button (frequency - the volume of each piston stroke) and LED indicator;
- Manual air bleed valve;
- horizontal installation.
- Overall dimensions (height x width x length) - 187x115x250mm.
Characteristics
Producer | AQUA |
Material | PP |
Power supply | 1х220 V, 50 Hz |
Control | Manual |
Power capacity, Wt | 14 |
Dosage mode: Continually ON-OFF | Yes |
Input foe sensor | No |
Model | MST |
Dosage mode: proportional PROP | No |
Input for sensor CD | No |
Product regulation 0-100% | Yes |
Input foe temperature sensor | No |
Input for level sensor reagent | Yes |
Input mA | No |
Pump head type | PP 1/2" |
Flow rate, l/h | 7 |
Input 4-20 mA | No |
Output service relay | No |
Pulse input(From Flowmetwer) | No |
Support for flow sensor | No |
Hose standard size | 4x6 |
Input foe sensor PH | No |
Diaphragm stroke per min. | 150 |
Pressure, bar | 4 |
Input for sensor RX | No |
Pump body material | Polypropylene |
Serial number of the pump | HC101 |
Country of Origin | Italy |
PumpType | dosing solenoid |
Drive Type | electric |
Application | algaecide, hypochlorite, caustic, acid, coagulant, of hydrochloric acid, alkalis |
Logistics data: | |
Weight, kg | 3 |
Categories:Solenoid pump dispenserDosing pumpsPump for dosing hypochlorite, chlorineChemical dosing pumpsDosing pumps AQUA
Products from the same category
ADA13013A2000
Pre-order only