Catalog
Else categories
Diaphragm dosing pump PDE HC200 PI-MA 10-10 110V PP-GL-VT
Also buy with this product
Overview
Electromagnetic solenoid dosing pumps HC 200 PI mA for constant and proportional dosing.
- High consumption;
- Mechanical adjustment of the pump operation (injection volume)
- Supports level sensor, statistics and password functions;
- Setting the language and units of measurement;
- Consumption calibration;
- Simplified user menu settings;
- Alphanumeric display, 2 lines of 16 characters to simplify pump control during operation and programming;
- standard power supply: 220V AC - 50 / 60Hz. On demand-110V;
- Protection class-IP65;
WORKING MODE
- On/Off mode of constant consumption and cycle mode (time/dosing stop, the function of delayed on/off);
- proportional analog signal 4-20 mA. The dosing range is fully regulated by consumer;
- Proportional to digital signal (metering pulse transmitter) Mode: ppm, 1xN (multiplication of received pulses), 1: N (division of received pulses), 1xN (T) (proportional dosing in the interval of two pulses), 1xN (M) ( with a self-regulation frequency of input pulses exceeding the norm)
- Batch mode (setting the number of strokes and their frequency in time): external mode (activated by an external signal) and manual control mode (activated with the "UP, DOWN" keys)
- Selectable alarms: level signal (in "standby", warning signal), flow signal (flow sensor input), piston stroke signal (maximum number of strokes).
Characteristics
| Producer | AQUA |
| Material | PP |
| Power supply | 1х220 V, 50 Hz |
| Control | Microprocessing |
| Power capacity, Wt | 34 |
| Dosage mode: Continually ON-OFF | Yes |
| Input foe sensor | No |
| Model | PI-mA |
| Dosage mode: proportional PROP | Yes |
| Input for sensor CD | No |
| Product regulation 0-100% | Yes |
| Input foe temperature sensor | No |
| Pump head type | PP 3/8" |
| Input for level sensor reagent | Yes |
| Input mA | Yes |
| Flow rate, l/h | 17 |
| Input 4-20 mA | Yes |
| Output service relay | Yes |
| Pulse input(From Flowmetwer) | Yes |
| Support for flow sensor | Yes |
| Hose standard size | 4x6 |
| Input foe sensor PH | No |
| Pressure, bar | 10 |
| Input for sensor RX | No |
| Number of pulses | 120 |
| Pump body material | Polypropylene |
| Serial number of the pump | HC200 |
| Country of Origin | Italy |
| PumpType | dosing solenoid |
| Drive Type | electric |
| Application | algaecide, hypochlorite, caustic, acid, coagulant, of hydrochloric acid, alkalis |
| Weight, kg | 5 |
Categories:Solenoid pump dispenserDosing pumpsPump for dosing hypochlorite, chlorineChemical dosing pumpsDosing pumps AQUA
Products from the same category
ADA23013A2000
Pre-order only
ADA23023A2000
Pre-order only
ADA23023B2000
Pre-order only
AD99103020000
Pre-order only
