Catalog
Else categories
- Home
- Industrial pumps
- Pumps by typeBarrel pumps Vacuum pumpsVertical semi-submersible pumpsScrew pumpsVortex pumpsHermetic pumpsDispersant-emulsifier, homogenizerDosing pumpsImpeller pumpsSewer stationsCantilever pumpsLobe pumpsDiaphragm pumpsMultistage pumpsCast iron monobloc pumpsMotor pumpsMotor diaphragm pumpsEx ATEX pumpPTO driven pumpDouble inlet pumpsInline pumpsGlandless pumpsAxial pumpsPeristaltic pumpsRotary vane pumpsPlunger pumpsSemi-submersible fecal, drainage pumpSubmersible drainage and fecal pumpsSubmersible slurry pumpsPiston pumpsRoller pumps Self-priming centrifgual pumpSanitary, hygienic pumpsBorehole pumpsSolenoid pump dispenserWater supply and fire extinguishing stationsChemical magnetic pumpsCentrifugal pumpsGear pumpsIndustrial hose peristaltic pumps
- Solenoid pump dispenser
- Dosing pump PDE eONE MF 04-20 100/250V
Dosing pump PDE eONE MF 04-20 100/250V
Also buy with this product
Documentation
Download instructions, catalog for Dosing pump PDE eONE MF 04-20 100/250V
Overview

Digital multifunctional proportional metering pump.
Backlit liquid crystal display.
The maximum pulse frequency is 300 imp/min. A procedure for calibrating a specific pulse for specific needs.
Dosage regimens:
-Manual ON/OFF; performance adjustment options: 0-100%, 0-300 imp/min, 0-XX L/H.
– Proportional: from the pulse flow meter – modes: multiplication 1xn, multiplication with memory 1xn(M), Division 1:n, function 1xml (for each pulse from the flow meter – the pump will give out the programmed amount of "ML" (milliliters) of the metered reagent), function 1XL (for each pulse from the flow meter – the pump will give out the programmed amount of "L" (liters) of the metered reagent), function ml X M3 (the pump receives input pulses from the flow meter and counts the passage of 1 m3 of liquid through the flow meter, after which the pump will output the pre – programmed amount of "ML" (milliliters) of the dosed reagent); ppm function (the dispenser pump will perform the necessary calculations and output the exact amount of PPM (ppm: time
Characteristics
Producer | ETATRON D.S. |
Material | PVDF |
Power supply | 1х220 V, 50 Hz |
Control | Manual |
Power capacity, Wt | 10/32 Вт 1,8А |
Dosage mode: Continually ON-OFF | Yes |
Input foe sensor | No |
Model | MF |
Dosage mode: proportional PROP | Yes |
Input for sensor CD | No |
Product regulation 0-100% | Yes |
Input foe temperature sensor | No |
Impulse volume | 0,22 |
Input for level sensor reagent | Yes |
Input mA | No |
Flow rate, l/h | 4 |
Input 4-20 mA | Yes |
Output service relay | Yes |
Pulse input(From Flowmetwer) | Yes |
Support for flow sensor | Yes |
Input foe sensor PH | No |
Pressure, bar | 20 |
Input for sensor RX | No |
Number of pulses | 300 |
Pump body material | PVDF |
Serial number of the pump | eONE |
Country of Origin | Italy |
PumpType | dosing solenoid |
Drive Type | electric |
Availability of spare parts | Yes |
Application | algaecide, hypochlorite, caustic, acid, coagulant, of hydrochloric acid, alkalis |
Analogue for | AquaViva, ASeko, Descon trol S, Emec, FWT, Injecta, Seko |
Logistics data: | |
Weight, kg | 4,5 |
Categories:Solenoid pump dispenserDosing pumpsPump for dosing hypochlorite, chlorineChemical dosing pumps