Catalog
Else categories
Submersible pump Wilo Drain TMT 32M113/7,5Ci
Also buy with this product
1042539
Pre-order only
Overview
Submersible pump Wilo Drain TMT for dirty water, for vertical submersible installation, for pumping media with a maximum temperature of 95 °C. The unit is made entirely of grey cast iron. Hydraulics with pressure connection in the form of a horizontal threaded flange connection. Surface-cooled motor for three-phase current with a sealing chamber, thermal monitoring of the motor and tightness control of the motor compartment. Detachable heat-resistant connection cable with waterproof gland and free end. One sliding mechanical seal is installed on each side of the medium and motor, independent of the direction of rotation.
Characteristics
| Producer | Wilo |
| Power capacity, kW | 0,75 |
| Output pipe diameter | G 1 1/4" |
| Rate of turn, rpm | 2 900 |
| Protection | IP68 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 22 |
| Cabel length,m | 10 |
| Max.temperature, C | 95 |
| Nom.flow rate, m3/h | 12 |
| Dimensions, mm | 203х241х484 |
| Nom.head, m | 11 |
| Max. head, m | 16 |
| Maximal altitude of immersion under the water surface, m | 7 |
| Housing material | Сast iron |
| Impeller material | cast iron |
| Shaft material | нержавіюча сталь |
| Country of Origin | Germany |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Installation Type | vertical |
| Type of configuration | with engine |
| Weight, kg | 39 |
Products from the same category
New!
New!
New!
