Catalog
AL-KO Drain 7500 Classic submersible pump for dirty water
Also buy with this product
Overview
Classic model of a submersible pump for pumping out dirty water. The impeller is made of technopolymer. Such pump can handle particles up to 30 mm, this will allow it to pump out drainage ditches, swimming pools, and utility pits. Installing it for pumping the septic tank is not recommended. To a greater extent, the scope of application of the AL-KO Drain 7500 Classic pump is pumping heavily polluted water with small impurities of dirt from basements and other technical rooms. Sand impurities are also allowed, but in limited quantities. The pump is made of high-quality impact-resistant plastic. As with all models, the engine is equipped with thermal protection. The float sensor monitors the water level automatically. Technical characteristics of the AL-KO Drain 7500 Classic submersible pump: - maximum Head 6 meters - maximum consumption 7.5 m3 / h - engine power 0.45 kW. - cable length 10 meters. 3-year warranty
Characteristics
| Producer | AL-KO |
| Pump capacity, cu.m/hour | 7.5 |
| Feed height, m | 6 |
| Power capacity, kW | 0,45 |
| Output pipe diameter | G 1 1/4 |
| Max.diameter of solid inclusions, mm | 30 |
| Maximal altitude of immersion under the water surface, m | 5 |
| Max. head, m | 6 |
| Dimensions, mm | 230x170x340 |
| Max.flow rate, m3/h | 7.5 |
| Country of Origin | Germany |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Application | wells |
| Weight, kg | 5 |
Categories:Submersible drainage and fecal pumpsSewage and sewage pumpsPumps for SPS (sewage pumping stations)
Products from the same category
