Catalog
Else categories
Sewage pump 2CM 150-125-315/4a, 30 kW, 1500 rpm (without motor)
Also buy with this product
1042539
Pre-order only
Documentation
Download instructions, catalog for Sewage pump 2CM 150-125-315/4a, 30 kW, 1500 rpm (without motor)
Overview
CM and 2CM industrial sewage pumps – centrifugal, horizontal, single-stage pumps with a closed impeller – are designed for pumping dirty water, domestic and industrial wastewater (sewage), sewage and other contaminated liquids with a pH of 6–8.5, a density of up to 1100 kg/m³, a temperature of 0–+90°C, and a content of abrasive particles not exceeding 1% by volume, with a size of up to 5 mm and a microhardness of no more than 9000 MPa.
The difference between CM and 2CM pumps lies in the 2CM model having a pressure cap, which increases the pump’s self-priming head.
Characteristics
| Producer | Ukrnasosservis |
| Pump capacity, m3/h | 175 |
| Feed height, m | 26.5 |
| Power capacity, kW | 30 |
| Material | cast iron |
| Input pipe diameter | DN150 |
| Output pipe diameter | DN125 |
| Rate of turn, rpm | 1 500 |
| Power supply | 3х380 V, 50 Hz |
| Explosion protection | No |
| Max.temperature, C | 90 |
| Nom.flow rate, m3/h | 175 |
| Max.diameter of solid inclusions, mm | 58 |
| Dimensions, mm | 997x476x652 |
| Nom.head, m | 26.5 |
| Housing material | Сast iron |
| Impeller material | cast iron |
| Serial number of the pump | 2CM |
| Country of Origin | Ukraine |
| PumpType | поверхностный дренажно-фекальный |
| Drive Type | electric |
| Installation Type | horizontal |
| Type of configuration | without engine |
| Weight, kg | 258 |
Categories:Semi-submersible fecal, drainage pump2CM-type surface pumps for slurry, featuring reduced energy consumption
Products from the same category
1058173
Pre-order only
1058175
Pre-order only
1058177
Pre-order only
1058179
Pre-order only