Catalog
Else categories
circulation pump 245W Hmax 8m Qmax 200l/min D 1 1/2inch 180mm + nuts D1inch Aquatica
Overview
Pump circulation 245Vt Hmax 8m Qmax 200l / min Ø1½ "180mm + nuts Ø1" AQUATICA (774,141) These pumps are designed for pumping clean water, may be used for water circulation in the central and zonal heating systems, air conditioning and hot water supply systems , Pumping Unit: - Body: cast iron; - The motor shaft: ceramic; - Impeller: technopolymer Motor: - Motor type: asynchronous, trohskorostnoy, silent; - the stator windings of copper; - motor stator sleeve: Stainless steel AISI 304; - Bearing: Ceramic groove; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: H; - Protection: IP44, Nozzle: - DN pump: 1½ "; - DN adapter 1" Operating conditions: - maximum liquid temperature: +110 ºC; - Maximum ambient temperature: +40 ºC; - Permitted system pressure up to 10 bar; - for clean water only without abrasive impurities (sand, clay, lime
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 12 |
| Feed height, m | 8 |
| Power capacity, kW | 0,245 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 12 |
| Length, mm | 180 |
| Max.medium temperature, Celsius degree | 110 |
| Width, mm | 150 |
| The diameter of loaded solid particles, mm | 0.2 |
| Nom.head, m | 3.5 |
| Max. head, m | 8 |
| Height, mm | 160 |
| Pressure, bar | 10 |
| Country of Origin | China |
| Availability of spare parts | Yes |
