Catalog
Else categories
circulation pump 270W Hmax 12m Qmax 65l/min D1 1/2inch 180mm + nuts D1inch Leo3.0
Overview
Pump circulation 270W Hmax 12m Qmax 65l / min Ø1½ "nut 180mm + Ø1" LEO 3,0 (774,471) These pumps are designed for pumping clean water, may be used for water circulation in the central and zonal heating systems, air conditioning systems and in the hot water systems, Pumping Unit: - Body: cast iron; - Engine shaft: cermet based on aluminum oxide; - Impeller: technopolymer Motor: - Motor type: asynchronous, trohskorostnoy, silent; - the stator windings of copper; - motor stator sleeve: Stainless steel AISI 304; - Bearings: cermet based on aluminum oxide; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: H; - Degree of protection: IP44; - Cable length: 1 m, Nozzle: - DN1: 1½ "; - thread adapter 1" Operating conditions: - maximum liquid temperature: +110 ºC; - Maximum ambient temperature: +40 ºC; - Permitted system pressure up to 10 bar; - d only
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 3.9 |
| Feed height, m | 12 |
| Power capacity, kW | 0,27 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 3.9 |
| Length, mm | 180 |
| Max.medium temperature, Celsius degree | 110 |
| Width, mm | 148 |
| The diameter of loaded solid particles, mm | 0.2 |
| Nom.head, m | 5 |
| Max. head, m | 12 |
| Height, mm | 155 |
| Pressure, bar | 10 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
