Catalog
Else categories
Circulation pump with temperature sensor 65W Hmax 4m Qmax 63l/min Ø1½inch 130mm + nuts Ø1inch AQUATICA
Overview
Pump circulation from the temperature sensor 65W Hmax 4m Qmax 63l / min Ø1½ "130mm + Ø1 nut" AQUATICA (774,013) of the pumps are designed to circulate water in heating systems, air conditioning and hot water supply, in pumps of this series, the user can select a range of temperature at which the pump will work, thus maximizes the efficiency and increases operating life, especially those pumps is 2 modes - "warm floors" and "Heating" pump part: - housing: iron; - The motor shaft: ceramic; - Impeller: technopolymer Motor: - Motor type: asynchronous, low noise; - the stator windings of copper; - motor stator sleeve: Stainless steel AISI 304; - Bearing: Ceramic groove; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: H; - Protection: IP44, Nozzle: - DN pump: 1½ "; - DN adapter 1" Operating conditions: - maximum temperature perek
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 3.8 |
| Feed height, m | 4 |
| Power capacity, kW | 0,065 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 3.8 |
| Length, mm | 130 |
| Max.medium temperature, Celsius degree | 110 |
| Width, mm | 140 |
| The type of motor | Асинхронный, бесшумный |
| Max. head, m | 4 |
| Height, mm | 130 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
