JET-120S surface centrifugal pump

The TM ZEGOR pumps of the JET series are designed for pumping clean water, are used for domestic water supply, irrigation systems of gardens and vegetable gardens, greenhouses and greenhouses, automatic water supply together with small tanks when using control automation. Application conditions: ATTENTION: before prolonged inactivity of the pump, it is necessary to drain the water from the pump part and wipe it dry. Do not turn the pump into operation at sub-zero temperature! Maximum ambient temperature: +4OC; Maximum pressure in the working chamber of the pump: 6 bar; Maximum suction height: up to 8m; Only for clean water without abrasive impurities (sand, clay, lime, etc.); Water hydrogen index (pH): 6.5-8.5; Voltage: 220-240V; Frequency: 50Hz; Warranty period: 24 months. DESIGN FEATURES: Pumping part: Pump chamber body: cast iron; The wheel is working: high-strength technopolymer; Diffuser with Venturi tube: high-strength technopolymer; Power cable: 1.5m with euroville. Electric motor: Motor type: asynchronous, closed type, air-cooled, with thermal protection built into the winding; Stator winding: copper; Motor shaft: stainless steel AISI 304 ; Insulation class: B; Protection class: IP44.