Catalog
Else categories
JS-120S surface centrifugal pump
Overview
TM ZEGOR JS series pumps are designed for pumping clean water, are used for domestic water supply, irrigation systems of gardens and vegetable gardens, greenhouses and greenhouses, automatic water supply together with small tanks when using control automation.
Application conditions:
ATTENTION: before prolonged inactivity of the pump, it is necessary to drain the water from the pump part and wipe it dry. Do not turn the pump into operation at sub-zero temperature.
Maximum ambient temperature: +4OC;
Maximum temperature of the pumped liquid: +40C;
Maximum pressure in the working chamber of the pump: 6 bar;
Maximum suction height: up to 8m;
Only for clean water without abrasive impurities (sand, clay, lime, etc.);
Water hydrogen index (pH): 6.5-8.5;
Voltage: 220-240V;
Frequency: 50Hz;
Warranty period: 24 months.
DESIGN FEATURES
Pumping part:
Pump chamber body: stainless steel AISI 304;
Working wheel: stainless steel AISI 304;
Power cable: 1.5m with euroville.
Electric motor:
Motor type: asynchronous, closed type, air-cooled, with thermal protection built into the winding;
Stator winding: copper;
Motor shaft: stainless steel AISI 304;
Insulation class: B;
Protection class: IP44.
Characteristics
| Producer | ZEGOR |
| Pump capacity, cu.m/hour | 3 |
| Feed height, m | 47 |
| Power capacity, kW | 1,1 |
| Input pipe diameter | G1 |
| Output pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 3 |
| Max.medium temperature, Celsius degree | 40 |
| Max. head, m | 47 |
| Country of Origin | China |
| PumpType | console |
| Drive Type | electric |
Video JS-120S surface centrifugal pump
Products from the same category
