Catalog
Else categories
1.5kVt centrifugal pump Hmax Qmax 14.5m 1000l / min 3 inch Leo 3,0
Overview
Centrifugal pump 1.5kW Hmax 14.5m Qmax 1000l / min 3 "LEO 3.0 (775282) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems gardens . and gardens, greenhouses and greenhouses, automatic water together with small reservoirs using control automatics (control switch, pressure controllers) installation must be made in areas protected from the weather and moisture pumping part: -. Case: iron corrosion-resistant - Impeller: brass; - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in coil thermal protection; - bearing: rolling (C & U); - stator windings: copper; - voltage: 220-240 - frequency: 50 Hz - insulation class: F; - protection: IPH4 - Length Single
Characteristics
| Producer | LEO |
| Pump capacity, m3/h | 60 |
| Feed height, m | 14.5 |
| Power capacity, kW | 1,5 |
| Input pipe diameter | G3 |
| Output pipe diameter | G3 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 60 |
| Max.pump flow, m3/h | 60 |
| Length, mm | 386 |
| Max.medium temperature, Celsius degree | 60 |
| Max.head, meter of water column | 14,5 |
| Width, mm | 230 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 11.2 |
| Max. head, m | 14.5 |
| Height, mm | 295 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
