Catalog
Else categories
1.5kVt centrifugal pump Hmax 37.5m Qmax 250l / min Leo 3.0
Overview
Centrifugal pump 1.5kW Hmax 37.5m Qmax 250l / min LEO (775,228) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation of gardens, greenhouses and greenhouses, water supply over a long distance, automatic water together with small reservoirs using automatic control (control switch, pressure controllers). Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Body: cast iron with anti-corrosion treatment; - Impeller: AISI 304 stainless steel - Motor Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 220-240V; - Frequency: 50 Hz; - class
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 15 |
| Feed height, m | 37.5 |
| Power capacity, kW | 1,5 |
| Input pipe diameter | G1 1/2 |
| Output pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 15 |
| Max.medium temperature, Celsius degree | 60 |
| Nom.head, m | 32 |
| The type of motor | Асинхронный, закрытого типа, воздушного охлаждения, со встроенной в обмотку термозащитой |
| Max. head, m | 37.5 |
| Material of flow channel | cast iron |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
