Catalog
Else categories
3.0kVt centrifugal pump Hmax Qmax 20m 1200l / min 4 inch Leo 3,0
Overview
Centrifugal pump 3.0kVt Hmax Qmax 20m 1200l / min 4 "LEO 3.0 (775287) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems and gardens . gardens, greenhouses and greenhouses, automatic water together with small reservoirs using control automatics (control switch, pressure controllers) installation must be made in areas protected from the weather and moisture pumping part: - housing: cast iron with anti-corrosion treatment;. - Impeller: brass; - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in coil thermal protection; - bearing: rolling (C & U); - stator windings copper - voltage: 220-240 V; - frequency: 50 Hz - insulation class: F; - protection: IPH4 - kabe Length
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 72 |
| Feed height, m | 20 |
| Power capacity, kW | 3 |
| Input pipe diameter | G4 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 72 |
| Length, mm | 460 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 230 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 16.2 |
| Max. head, m | 20 |
| Height, mm | 295 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
