Catalog
Else categories
3.0kVt centrifugal pump Hmax Qmax 800l 30m / min 2 inch Leo 3,0
Overview
Centrifugal pump 3.0kVt Hmax 30m Qmax 800l / min 2 "LEO 3.0 (775271) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems and gardens . gardens, greenhouses and greenhouses, water supply over a long distance, automatic water together with small reservoirs using control automatics (control switch, pressure controllers) installation must be made in areas protected from the weather and moisture pumping part: -. Corpus : cast iron with anti-corrosion treatment; - Impeller: stainless steel AISI 304 - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in coil thermal protection; - bearing: rolling (C & U ) - the stator windings of copper; - voltage: 220-240 - frequency: 50 Hz -
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 48 |
| Feed height, m | 30 |
| Power capacity, kW | 3 |
| Input pipe diameter | G2 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 48 |
| Length, mm | 444 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 225 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 23.5 |
| Max. head, m | 30 |
| Height, mm | 315 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
