Catalog
Else categories
3.0kVt centrifugal pump Hmax Qmax 250l 65m / min Leo 3.0
Overview
Multistage centrifugal pump 3.0kVt Hmax 65m Qmax 250l / min LEO 3.0 (775297) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation of gardens , hothouses and greenhouses, water supply over a long distance, automatic water together with small reservoirs using automatic control (control switch, pressure controllers). Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Body: cast iron with anti-corrosion treatment; - Impeller: Brass; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Klas
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 15 |
| Feed height, m | 65 |
| Power capacity, kW | 3 |
| Input pipe diameter | G1 1/2 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 15 |
| Length, mm | 480 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 281 |
| The diameter of loaded solid particles, mm | 2 |
| Max. head, m | 65 |
| Height, mm | 311 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
