Catalog
Else categories
Centrifugal pump 380 2.2kVt Qmax Hmax 17.5m 1000l / min 3 inch Leo 3,0
Overview
Centrifugal pump 380 2.2kW Hmax 17.5m Qmax 1000l / min 3 "LEO 3.0 (7752923) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems . of gardens, greenhouses and greenhouses, automatic water together with small tanks using control automatics (control switches, pressure controllers) installation must be carried out in places protected from the weather and moisture Pumping Unit: -. housing: cast iron with anti-corrosion treatment - Impeller: stainless steel AISI 304 - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in coil thermal protection; - bearing: rolling (C & U); - windings stator copper; - voltage: 380 V - frequency: 50 Hz - insulation class: F; - class of
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 60 |
| Feed height, m | 17.5 |
| Power capacity, kW | 2,2 |
| Input pipe diameter | G3 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 60 |
| Length, mm | 471 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 230 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 14.2 |
| Max. head, m | 17.5 |
| Height, mm | 300 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
