Catalog
Else categories
Centrifugal pump 380 2.2kVt Hmax Qmax 150l 55m / min Leo 3.0
Overview
Centrifugal pump 380 2.2kW Hmax 55m Qmax 150l / min LEO 3.0 (7752663) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation of gardens , hothouses and greenhouses, water supply over a long distance, automatic water together with small reservoirs using automatic control (control switch, pressure controllers). Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Body: cast iron with anti-corrosion treatment; - Impeller: AISI 304 stainless steel; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 380 V; - Frequency: 50 Hz; -
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 9 |
| Feed height, m | 55 |
| Power capacity, kW | 2,2 |
| Input pipe diameter | G1 1/4 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 9 |
| Length, mm | 360 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 240 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 45.5 |
| Max. head, m | 55 |
| Height, mm | 286 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
