Catalog
Else categories
Centrifugal pump 380 3.0kVt Qmax Hmax 20m 1200l / min 4 inch Leo 3,0
Overview
Centrifugal pump 380 3.0kVt Hmax Qmax 20m 1200l / min 4 "LEO 3.0 (7752873) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems gardens . and gardens, greenhouses and greenhouses, automatic water together with small reservoirs using control automatics (control switch, pressure controllers) installation must be made in areas protected from the weather and moisture pumping part: -. Case: iron corrosion-resistant - Impeller: brass; - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in coil thermal protection; - bearing: rolling (C & U); - stator windings: copper; - voltage: 380 V - frequency: 50 Hz - insulation class: F; - protection: IPH4 - Length Single
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 72 |
| Feed height, m | 20 |
| Power capacity, kW | 3 |
| Input pipe diameter | G4 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 72 |
| Length, mm | 460 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 230 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 16.2 |
| Max. head, m | 20 |
| Height, mm | 295 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
