Catalog
Else categories
Centrifugal pump 380 7.5kVt 56,5m Hmax Qmax 900l / min 2 inch Leo 3,0
Overview
Centrifugal pump 380 7.5kW Hmax 56.5m Qmax 900l / min 2 "LEO 3.0 (7752743) These pumps are designed for pumping clean water may be used for domestic and industrial water supply of auxiliary equipment, water rise in the high and low pressure conduits, irrigation systems of gardens, greenhouses and greenhouses, water supply over a long distance, automatic water together with small reservoirs using control automatics (control switch, pressure controllers) installation must be made in areas protected from the weather and moisture pump part..: - housing: cast iron with anti-corrosion treatment; - Impeller: AISI 304 stainless steel; - motor shaft: stainless steel AISI 304. motor: - engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - bearing: rolling (C & U); - the stator windings of copper; - voltage: 380 V - frequency: 50 T
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 54 |
| Feed height, m | 56.5 |
| Power capacity, kW | 7,5 |
| Input pipe diameter | G2 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 54 |
| Length, mm | 515 |
| Max.medium temperature, Celsius degree | 60 |
| Width, mm | 290 |
| The diameter of loaded solid particles, mm | 3 |
| Nom.head, m | 42 |
| Max. head, m | 56.5 |
| Height, mm | 360 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
