Catalog
Else categories
Bahatostup centrifugal pump. 0.75kVt Qmax Hmax 46.5m 90l / min Leo 3.0
Overview
Multistage centrifugal pump 0.75kVt Hmax 46.5m Qmax 90l / min LEO 3.0 (775434) These pumps are designed for pumping clean water used for domestic water, auxiliary equipment, lifting the water in the high and low pressure conduits, irrigation systems gardens and gardens, greenhouses and greenhouses, automatic feed water together with small reservoirs using automatic control (control switch, pressure controllers). Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Body: cast iron with anti-corrosion treatment; - Impeller: technopolymer; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: F; - Protection class: IPX4; - Cable length
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 5.4 |
| Feed height, m | 46.5 |
| Power capacity, kW | 0,75 |
| Input pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 5.4 |
| Length, mm | 510 |
| Max.medium temperature, Celsius degree | 40 |
| Width, mm | 180 |
| The diameter of loaded solid particles, mm | 0.2 |
| Nom.head, m | 35.5 |
| Max. head, m | 46.5 |
| Height, mm | 202 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
