Catalog
Else categories
0.11kVt vortex pump Qmax Hmax 23M 25l / min Leo
Overview
The pump vortex 0.11kVt Hmax 23m Qmax 25l / min LEO (775,120) is designed for pumping clean water, may be used for domestic water, auxiliaries, water rise in the high and low pressure conduits, irrigation of gardens, greenhouses and greenhouses, ADF water together with small reservoirs using automatic control (control switch, pressure controllers). Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Body: cast iron with anti-corrosion treatment; - Impeller: Brass; - an alloy based on copper plate to prevent jamming of the impeller; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: F
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 1.5 |
| Feed height, m | 23 |
| Power capacity, kW | 0,11 |
| Input pipe diameter | G1 |
| Output pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 1.5 |
| Max.pump flow, m3/h | 1.5 |
| Max.medium temperature, Celsius degree | 60 |
| Max.head, meter of water column | 23 |
| The diameter of loaded solid particles, mm | 0.2 |
| Nom.head, m | 11 |
| Max. head, m | 23 |
| Pressure, bar | 5 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
