Catalog
Else categories
1.1kVt vortex pump Qmax Hmax 85M 70l / min Leo 3.0
Overview
The pump vortex 1.1kW Hmax 85m Qmax 70 l / min LEO 3.0 (775 136) - this series pump for pumping clean water and can be used: for domestic water in pressurization systems, water rise in the high and low pressure conduits, irrigation systems and gardens gardens, greenhouses and greenhouses, automatic water together with small reservoirs using automatic control (control relays, pressure controllers). Pumping Unit: - Body: cast iron with anti-corrosion treatment; - an alloy based on copper plate to prevent jamming of the impeller; - Impeller: Brass; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator winding is copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: F; - Protection class: IPX4; - Cable length: 1 m Operating conditions: -. Maximal
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 4.2 |
| Feed height, m | 85 |
| Power capacity, kW | 1,1 |
| Input pipe diameter | G1 |
| Output pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 4.2 |
| Max.pump flow, m3/h | 4 |
| Max.medium temperature, Celsius degree | 60 |
| Max.head, meter of water column | 85 |
| The type of motor | Асинхронный, закрытого типа, воздушного охлаждения, со встроенной в обмотку термозащитой |
| Max. head, m | 85 |
| Pressure, bar | 12 |
| Country of Origin | China |
| Availability of spare parts | Yes |
Products from the same category
