Catalog
Else categories
Pump Pool 1.1kVt 15.2m Hmax Qmax 350l / min
Overview
A pump for pool 1.1kW Hmax 15.2m Qmax 350l / min LEO (772,225) These pumps are designed to pump water into the swimming pool water treatment systems and can perform the functions of the circulation pump in the loop filter unit system water exchange pool hydromassage systems and other filter units. Equipped prefilter coarse water purification to protect from small particulate matter. Installation of the equipment must be carried out in places protected from the weather and moisture. Pumping Unit: - Housing: high-strength technopolymer; - Impeller: technopolymer; - Engine Shaft: Stainless steel AISI 304. Motor: - Engine type: asynchronous closed type air cooling, with built-in thermal protection winding; - Bearings: rolling (C & U); - the stator windings of copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: IPX5; - Cable length: 1.5 m Application conditions: -. Maximum temperature
Characteristics
| Producer | LEO |
| Pump capacity, cu.m/hour | 21 |
| Feed height, m | 15.2 |
| Power capacity, kW | 1,1 |
| Input pipe diameter | G2 1/2 |
| Output pipe diameter | G2 1/2 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 21 |
| Length, mm | 553 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 35 |
| Max.head, meter of water column | 15 |
| Width, mm | 190 |
| The diameter of loaded solid particles, mm | 0.2 |
| Nom.head, m | 10.3 |
| Max. head, m | 15.2 |
| Height, mm | 278 |
| Impeller material | tecnopolymer |
| Country of Origin | China |
| Availability of spare parts | Yes |
| Application | pool |
Products from the same category
