Self-priming centrifugal pump station 1.0 kW Hmax 44m Qmax 73l / min stainless steel 24L Ukraine Aquatic

Water supply stations are equipped with a 24-liter hydraulic accumulator and control automation. The stations are designed for pumping clean water and can be used: for domestic water supply, auxiliary equipment, lifting water in high-and low-pressure pipelines, for irrigation systems of gardens and vegetable gardens, greenhouses and greenhouses. The pressure switch controls the operation of the electric pump - setting the pressure switch P (on) 1.4 bar / P (off) 2.8 bar. Installation of the equipment must be carried out in places protected from atmospheric influence and moisture. Pump part Case: Aisi 304 stainless steel Impeller: technopolymer Motor shaft: Aisi 304 stainless steel Electric motor Motor type: asynchronous, closed type, air-cooled, with integrated thermal protection in the winding bearing: rolling (C & U) Voltage: 220 – 240V Frequency: 50 Hz Insulation Class: F Protection class: IPX4 Cable length: 1.5 m Terms of use Maximum ambient temperature: + 40 C Maximum liquid temperature: + 35 C Maximum pressure in the pump working Chamber: up to 7 bar maximum suction height: up to 8 m Only for clean water without abrasive-containing impurities (sand, clay, lime, etc.) Hydrogen index of water (pH): 6.5 – 8.5 Total water salinity: no more than 1500 g / Mi Warranty period: 12 months