Catalog
Else categories
Centrifugal pump skvazhennyy 2.2kVt H 144 (96) m Q 140 (100) l / min Ø102mm
Overview
Centrifugal pump 2.2kW H 144 (96) m Q 140 (100) l / min Ø102mm AQUATICA (DONGYIN) (777,144) These pumps are designed for pumping clean water and can be used: for domestic and industrial use in water supply from wells and reservoirs ( mandatory installation cooling jacket), for pumping water into the tanks, for irrigation systems for automatic feeding of water together with small reservoirs using automatic control (control switch, pressure controllers). Structure: - outer diameter: 96 mm; - Pressure casing: brass; - Shell pumping part: stainless steel; - Val pumping part: stainless steel; - Engine Shaft: Stainless Steel; - Impeller: technopolymer; - Diffuser: technopolymer; - Check Valve: technopolymer; - Mechanical seal: Ceramic / graphite; - Condenser built into the bottom of the motor. Specifications: - Motor: induction, rewind, closed type, placed in
Characteristics
| Producer | DONGYIN |
| Pump capacity, cu.m/hour | 8.4 |
| Feed height, m | 144 |
| Power capacity, kW | 2,2 |
| Power supply | 1х220 V, 50 Hz |
| Max.flow rate, m3/h | 8.4 |
| Length, mm | 1 495 |
| Max.medium temperature, Celsius degree | 35 |
| Width, mm | 102 |
| The diameter of loaded solid particles, mm | 0,2 |
| Nom.head, m | 96 |
| Max. head, m | 144 |
| Maximal altitude of immersion under the water surface, m | 60 |
| The diameter of borehole, mm | from 120 to 150 |
| Country of Origin | China |
| PumpType | borehole |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | wells |
Products from the same category
