Catalog
Centrifugal pump skvazhennyy 15kVt 380 H 128 (75) m Q 1000 (750) l / min Ø151mm AQUATICA (DONGYIN) (7776
Overview
Centrifugal pump downhole 380V 15kW H 128 (75) M Q 1000 (750) l / min Ø151mm AQUATICA (DONGYIN) (7,776,673) These pumps are designed for pumping clean water and can be used: for domestic and industrial use in water supply from wells and reservoirs (mandatory installation of a cooling jacket), for pumping water into the tanks, for irrigation systems for automatic feeding of water together with small reservoirs using automatic control (control switch, pressure controllers). The pumping part: - The body of the pumping part: stainless steel AISI 304; - Output flange brass; - Val pumping part: stainless steel AISI 304; - shaft sleeve: Stainless steel AISI 304; - Impeller: technopolymer; - Disc shaped partition: technopolymer; - Diffuser: technopolymer. Motor: - Motor type: asynchronous, oil-filled, with a built-in thermal protection winding; - the stator winding is copper; - Motor housing: stainless steel
Characteristics
| Producer | DONGYIN |
| Pump capacity, cu.m/hour | 60 |
| Feed height, m | 128 |
| Power capacity, kW | 15 |
| Power supply | 3х380 V, 50 Hz |
| Max.flow rate, m3/h | 60 |
| Max. head, m | 128 |
| The diameter of loaded solid particles, mm | 0,2 |
| Nom.head, m | 75 |
| Diameter, mm | 151 |
| The diameter of borehole, mm | from 160 to 250 |
| Length, mm | 2 153 |
| Maximal altitude of immersion under the water surface, m | до 80 |
| Max.medium temperature, Celsius degree | 35 |
| Width, mm | 151 |
| Country of Origin | China |
| PumpType | borehole |
| Drive Type | electric |
| Availability of spare parts | yes |
| Application | wells |
Products from the same category
7776653
Pre-order only
