Catalog
Else categories
Pumps drainage 0.25kW Qmax Hmax 7.5m 150l / hv
Overview
Drain pump 0.25kW Hmax 7.5m Qmax 150l / min AQUATICA (773,321) These pumps are equipped with a float switch and may be used for: Handling of pure water, supplying water from open water, pumping the water from the basement, cellars, wells, reservoirs, irrigation systems irrigation and low pressure. Pump Unit: - Housing: iron / stainless steel AISI 304 ;; - Engine Shaft: Stainless steel AISI 304; - Impeller: technopolymer; - Outlet: technopolymer; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: ip68. - Cable length: 5.3 m; - capacity: 150 l / min; - Pressure: 7.5 m Operating conditions: - maximum liquid temperature: +40 ºC;. - The depth of immersion under Zerka
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 9 |
| Feed height, m | 7.5 |
| Power capacity, kW | 0,25 |
| Output pipe diameter | G1 1/2 |
| Power supply | 1х220 V, 50 Hz |
| Type | of a sewer |
| Max.flow rate, m3/h | 9 |
| Max.pump flow, m3/h | 9 |
| Length, mm | 166 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 40 |
| Max.head, meter of water column | 7,5 |
| Width, mm | 121 |
| The diameter of loaded solid particles, mm | 5 |
| Nom.head, m | 4.8 |
| Max. head, m | 7.5 |
| Height, mm | 335 |
| Impeller material | tecnopolymer |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Products from the same category
