Catalog
Pumps drainage 0.37kVt Hmax Qmax 150l 16m / min
Overview
Drain pump 0.37kVt Hmax 16m Qmax 150l / min AQUATICA (773,231) These pumps are equipped with a float switch and may be used for: Handling of pure water, supplying water from open water, pumping the water from the basement, cellars, wells, reservoirs, irrigation systems and irrigation low pressure. Pumping Unit: - Housing: Aluminum alloy; - Engine Shaft: Stainless steel AISI 304; - Impeller: technopolymer; - Diffuser: Cast iron; - Outlet: iron; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: ip68. - Cable length: 7 m; - capacity: 150 l / min; - Pressure: 16 m Conditions of use: - maximum liquid temperature: +40 ºC;. - Immersion depth of water under the mirror:
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 9 |
| Feed height, m | 16 |
| Power capacity, kW | 0,37 |
| Output pipe diameter | G1 |
| Power supply | 1х220 V, 50 Hz |
| Max. head, m | 16 |
| Max.head, meter of water column | 16 |
| Max.medium temperature, Celsius degree | 40 |
| Type | of a sewer |
| Height, mm | 365 |
| The diameter of loaded solid particles, mm | 2 |
| Nom.head, m | 6.4 |
| Max.pump flow, m3/h | 9 |
| Max.flow rate, m3/h | 9 |
| Max.temperature, C | 40 |
| Length, mm | 200 |
| Impeller material | tecnopolymer |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
| Weight, kg | 9,41 |
Products from the same category
